AdminKit — full text ==================== ## About AdminKit AdminKit.net is a free DNS, email-authentication and network-check service by Netbase JSC; it is not the AdminKit Bootstrap admin-dashboard template at adminkit.io and is not affiliated with it. ## Home (https://adminkit.net/) What is my IP — and is my connection safe? AdminKit reads your IP, network and connection from this request and tells you what it means, in plain language — no account, no install. AdminKit is the Machine Protocol Edge: free checks for the basics (IP, DNS, mail authentication, whois), and a protective layer for the connections devices and AI agents make that are not plain web traffic — device DNS, MQTT, Modbus, MCP/A2A. AdminKit is a brand of Netbase Enterprise Solutions and Applications Joint Stock Company (Netbase JSC). No third-party ads. security.txt and a disclosure policy from day one. ## All tools (https://adminkit.net/tools/) Every AdminKit check in one place, grouped by Network, Email, and Security & machines. ### What is my IP (https://adminkit.net/tools/my-ip/) Status: live AdminKit reads your public IP, ISP/ASN and approximate location straight from this request. It also flags CGNAT and shows which DNS resolver you are using, computed entirely from the request with nothing stored and no third-party geolocation database queried at any point. ### DNS lookup (https://adminkit.net/tools/dns-lookup/) Status: live Look up A, AAAA, MX, TXT, NS, CAA and other DNS record types for any domain over DNS-over-HTTPS, with each type explained, using Cloudflare's public resolver through an AdminKit Pages Function that validates the query, times it out after 3 seconds, and caches each distinct result for 60 seconds. ### MX lookup (https://adminkit.net/tools/mx-lookup/) Status: live AdminKit looks up a domain's mail exchanger (MX) records and their priorities, then makes a second round of A/AAAA lookups for up to 5 of the listed mail hosts, so you can see at a glance whether a host that is correctly listed can actually receive mail, not just whether it appears. ### Reverse DNS (PTR) (https://adminkit.net/tools/reverse-dns/) Status: live AdminKit looks up the PTR record for an IPv4 or IPv6 address, live, to show the hostname it reverse-resolves to, if any, since many receiving mail servers check for a matching, sensible PTR record as a basic anti-spam signal before accepting mail. ### Whois / RDAP (https://adminkit.net/tools/whois/) Status: live Look up registrar, registration and expiry dates, status codes and nameservers for a domain, or the allocation and registry for an IP address, via RDAP, fetched directly from your browser via the public rdap.org proxy without AdminKit's servers ever seeing the query. ### Subnet calculator (https://adminkit.net/tools/subnet-calculator/) Status: live Enter a CIDR or an address and mask and AdminKit returns the network address, broadcast address, usable host range and host count, for IPv4 and IPv6, calculated entirely in your browser as you type with nothing sent to a server at any point. ### DNS resolver / leak test (https://adminkit.net/tools/dns-resolver-test/) Status: coming-soon A DNS leak means your device's queries quietly go to a different resolver than configured — often a VPN, router or malware redirecting them — so check today by running "nslookup example.com" from a terminal and comparing the answering resolver against your settings. AdminKit's resolver test, coming with the API, will name the exact resolver that answered. ### SPF check (https://adminkit.net/tools/spf-check/) Status: live Yes, free and with no account: AdminKit parses your domain's SPF record, follows every include, a, mx, ptr, exists and redirect mechanism through nested includes, counts the DNS lookups against the RFC 7208 limit of 10, and explains the strength of the trailing "all" mechanism, so a silently failing record stops costing you delivered mail. ### DMARC check (https://adminkit.net/tools/dmarc-check/) Status: live Enter your domain and AdminKit's free tool parses its DMARC record (p, sp, rua, ruf, pct, adkim, aspf), explaining in plain language what happens to mail that fails SPF or DKIM alignment and whether aggregate or forensic reports are configured, so you can see today whether DMARC is enforced or only monitoring. ### DKIM check (https://adminkit.net/tools/dkim-check/) Status: live Enter a domain and selector below and this free tool looks up that DKIM selector's TXT record, validates its syntax and public key with AdminKit's own code, and explains common selector-hint patterns by provider, since DKIM keys are published per selector rather than per domain and there is no standard way to discover one from DNS alone. ### Blacklist (DNSBL) check (https://adminkit.net/tools/blacklist-check/) Status: coming-soon Yes: a DNSBL lookup is just a DNS query, so you can check for free without any AdminKit account by reversing your mail server's IP octets, appending a blocklist zone, and querying for an A record; any answer in the 127.0.0.x range means a listing. AdminKit's blacklist check, coming with the Check API, will run several DNSBLs in one pass. ### Open ports on my IP (https://adminkit.net/tools/port-check/) Status: live AdminKit scans only the public IP address you are connecting from, only after you click to start it, against a fixed list of TCP ports device makers commonly leave open by mistake — never an address you type in for someone else. ### SSL/TLS check (https://adminkit.net/tools/ssl-check/) Status: live Shows a hostname's certificate subject, issuer, expiry date counted down in days, and the TLS protocol version and cipher the server negotiated with AdminKit's live Check API — a real TLS handshake, run the moment you submit, with no account needed, so an expiring certificate or a deprecated protocol version shows up before a visitor's browser throws a warning. ### HTTP security headers (https://adminkit.net/tools/http-headers/) Status: live Fetches a URL's response headers live via AdminKit's Check API and shows which recommended security headers (CSP, HSTS, X-Content-Type-Options, Referrer-Policy, Permissions-Policy and more) are present or missing, with the actual value sent for each one present, so a gap that would sit quietly in a site's configuration shows up before a browser fails to enforce the protection it should add. ### MQTT exposure (https://adminkit.net/tools/mqtt-check/) Status: live AdminKit checks whether the public IP you are connecting from has an MQTT broker reachable from the internet, attempting a single anonymous CONNECT on port 1883 by default, so it reads back whether the broker accepts the connection without credentials, never subscribing to or publishing on any topic. ### Modbus exposure (https://adminkit.net/tools/modbus-check/) Status: live AdminKit checks whether the public IP you are connecting from has a Modbus/TCP industrial device reachable from the internet on port 502 by default, reading back only the device's own identity — vendor and product, via Modbus function 43 — never a coil or register, since Modbus/TCP has no built-in authentication at all. ### MCP endpoint check (https://adminkit.net/tools/mcp-check/) Status: live Probes an MCP server's initialize call live via AdminKit's Check API to check whether authentication is required, continuing to tools/list — never calling a tool — when it is not, so you can see whether an AI agent could reach your server's tools without proving who it is, the same way an attacker scanning for exposed MCP endpoints would. ### MAC vendor lookup (https://adminkit.net/tools/mac-lookup/) Status: live AdminKit looks up the IEEE-registered vendor for a MAC address's OUI prefix (its first three bytes) live via its own Check API, and flags locally-administered or randomized addresses that have no vendor to find, which is useful for identifying an unfamiliar device type on your own network, such as a router or camera. ### User agent (https://adminkit.net/tools/user-agent/) Status: live AdminKit shows your browser's raw User-Agent header and a plain-language breakdown of the browser name and version, rendering engine, operating system and coarse device type it implies, parsed entirely in your browser with no server round trip or third-party UA database involved. ### SPF validator (https://adminkit.net/tools/spf-validate/) Status: live AdminKit's SPF validator checks a pasted SPF TXT record's syntax, counts its DNS-lookup-causing terms against RFC 7208's limit of 10, and explains its qualifiers — entirely offline, with no DNS queries performed. It never follows include or redirect chains; for a live, fully-resolved check against your domain's actual DNS, use AdminKit's SPF check instead. ### IP info: classify an address offline (https://adminkit.net/tools/ip-info/) Status: live AdminKit's IP info tool classifies a single IPv4 or IPv6 address you paste — its version, legacy class, and IANA special-use category such as private RFC 1918, loopback, link-local, CGNAT, documentation, multicast or IPv6 ULA — plus its reverse-DNS name form, computed entirely offline with no DNS lookups, geolocation or ownership claims. ### IP in CIDR: does this address match my ranges? (https://adminkit.net/tools/ip-in-cidr/) Status: live AdminKit's IP-in-CIDR tool checks whether a pasted IPv4 or IPv6 address falls inside one or more CIDR ranges you list — the allowlist or firewall-rule question network admins ask daily — reporting each range's normalized network and well-known category, computed entirely in your browser with nothing sent to a server. ### IPv6 info: expand, compress, split an address (https://adminkit.net/tools/ipv6-info/) Status: live AdminKit's IPv6 info tool takes a pasted IPv6 address and reports its fully expanded and RFC 5952 compressed canonical forms, its prefix/interface-id split, and its address category -- or takes a MAC address and derives the modified EUI-64 interface id it would produce -- computed entirely offline, with no DNS lookup, geolocation or ownership claim. ### DNSSEC check (https://adminkit.net/tools/dnssec-check/) Status: live Enter a domain and AdminKit's free tool asks a validating resolver whether that zone publishes DNSSEC key material (DNSKEY, DS records) and whether the signature chain actually validates, returning a live secure, insecure or bogus verdict today rather than guessing from record syntax alone, backed by a real DNS query, not a static parser. ### MTA-STS check (https://adminkit.net/tools/mta-sts-check/) Status: live Enter a domain and AdminKit's free tool checks whether it publishes a live MTA-STS record and policy file, reading back the real mode — enforce, testing or none — and the MX hosts and max_age it declares, because without MTA-STS an attacker in the path can force incoming mail to a silent, unencrypted downgrade. ### BIMI check (https://adminkit.net/tools/bimi-check/) Status: live Enter a domain and AdminKit's free tool checks whether it publishes a live BIMI record at default._bimi, reads back the logo URL and VMC authority evidence it declares, and flags the one prerequisite most BIMI records are missing — an enforcing DMARC policy — because without that, the record is published but no supporting inbox will ever display the logo. ### TLS-RPT check (https://adminkit.net/tools/tls-rpt-check/) Status: live Enter a domain and AdminKit's free tool checks whether it publishes a live TLS-RPT record, reading back the real report destination (mailto or https) it declares, because without TLS-RPT a failing TLS delivery — including one blocked by this domain's own MTA-STS policy — stays invisible to whoever owns the domain. ### RTSP camera exposure (https://adminkit.net/tools/rtsp-check/) Status: live AdminKit checks whether the public IP you are connecting from has an RTSP camera or video server reachable from the internet, sending only an OPTIONS and a DESCRIBE request on port 554 by default, so it reads back whether the stream's description is viewable without authentication, never the video feed itself or any credential. ### DNS propagation check (https://adminkit.net/tools/dns-propagation/) Status: live AdminKit's free DNS propagation check queries the same name and record types against four public recursive resolvers at once — Cloudflare, Google, Quad9 and OpenDNS — live, and reports whether they already agree or are still disagreeing after a recent change, rather than guessing from a single lookup or a TTL countdown alone. ### DMARC record generator (https://adminkit.net/tools/dmarc-generator/) Status: live AdminKit's DMARC record generator builds the exact _dmarc TXT record string for your chosen policy, subdomain policy, report addresses, percentage and alignment settings — entirely in your browser, with nothing sent to any server. You still need to publish the result in your DNS and confirm it there with AdminKit's live DMARC check. ### MTA-STS policy generator (https://adminkit.net/tools/mta-sts-generator/) Status: live AdminKit's MTA-STS policy generator builds the exact mta-sts.txt policy file body and the matching _mta-sts TXT record from your chosen mode, MX host patterns and max_age — entirely in your browser, with nothing sent to any server. You still have to host the policy file and publish the TXT record yourself, then confirm both with AdminKit's live MTA-STS check. ### SPF record generator (https://adminkit.net/tools/spf-generator/) Status: live AdminKit's SPF record generator assembles the exact v=spf1 TXT record string from the IPv4/IPv6 addresses, include domains, a/mx/ptr mechanisms, redirect and trailing all qualifier you choose — entirely in your browser, with nothing sent to any server. You still need to publish the result in your DNS and confirm it there with AdminKit's live SPF check. ### BIMI record generator (https://adminkit.net/tools/bimi-generator/) Status: live AdminKit's BIMI record generator assembles the exact v=BIMI1 TXT record string from the SVG logo URL and optional Verified Mark Certificate (VMC) URL you enter — entirely in your browser, with nothing sent to any server. You still need to publish the result in your DNS, and it only does anything once your domain's DMARC policy is already enforced. ### TLS-RPT record generator (https://adminkit.net/tools/tls-rpt-generator/) Status: live AdminKit's TLS-RPT record generator builds the exact v=TLSRPTv1 TXT record for _smtp._tls. from the mailto: or https: report destinations you list, entirely in your browser, with nothing sent to any server. You still have to publish the record yourself, then confirm it with AdminKit's live TLS-RPT check. ### DKIM record generator (https://adminkit.net/tools/dkim-generator/) Status: live AdminKit's DKIM record generator formats the exact selector._domainkey. TXT record — v=DKIM1, k=, p= and optional t=/h=/s=/n= tags — from a PUBLIC key you already have, entirely in your browser. It never generates a key pair or sees a private key; publish the result in DNS and confirm it with AdminKit's live DKIM check. ### Email header analyzer (https://adminkit.net/tools/email-header-analyzer/) Status: live AdminKit's email header analyzer parses the raw headers you paste, entirely in your browser, into the Received delivery chain in order, a per-hop delay computed from those servers' own timestamps, the Authentication-Results SPF, DKIM and DMARC verdicts already stamped, and the earliest public IP it can identify. It reads what the servers wrote; it never verifies anything live. ### CAA record generator (https://adminkit.net/tools/caa-generator/) Status: live AdminKit's CAA record generator builds the exact zone-file CAA lines for the certificate authorities you authorize, any wildcard-specific authorization, the critical flag, and an iodef reporting address — entirely in your browser, with nothing sent to any server. You still need to publish the result in your DNS before it restricts anything, then confirm it with AdminKit's DNS lookup. ## Clusters (https://adminkit.net/clusters/) Every tool, guide, glossary term, comparison and solution belongs to one of six clusters. ### DNS (https://adminkit.net/clusters/dns/) DNS turns domain names into the IP addresses, mail servers and records your tools actually look up — most "it broke" reports trace back to one wrong, missing or not-yet-propagated DNS record somewhere in that chain. AdminKit's DNS tools cover lookups, propagation, DNSSEC and reverse DNS so you can see which record or resolver is actually out of date before you guess. ### Email authentication (https://adminkit.net/clusters/email-authentication/) SPF, DKIM and DMARC are the three DNS-published records that tell receiving mail servers whether a message from your domain can be trusted — get one wrong and mail lands in spam or gets rejected outright. ### IP & network (https://adminkit.net/clusters/ip-network/) Your public IP, subnet and routing determine who can reach your connection and how it is addressed on the internet — the starting point for almost every other check on this site. ### Machine protocols (https://adminkit.net/clusters/machine-protocols/) MQTT, Modbus, RDP, VNC and the other protocols your devices and legacy systems speak were mostly designed for trusted local networks, not the open internet — exposing one is a common way in for an attacker. ### AI agents & MCP (https://adminkit.net/clusters/ai-agents-mcp/) The Model Context Protocol lets AI agents call tools and read resources over a network connection, which means an unauthenticated or misconfigured MCP server can hand an agent — or an attacker — more access than intended. ### Security basics (https://adminkit.net/clusters/security-basics/) TLS certificates, HTTP security headers and open ports are the fundamentals every internet-facing service should get right, independent of which protocol, operating system or cloud provider it runs on — most breaches start with one of these basics left unchecked. ## Products (https://adminkit.net/products/protective-dns/) Six layers on one control plane: L0 free checks, L1 Protective DNS for devices, L2 MCP/Agent Gateway and Agent Trust API, L3 Secure MQTT Broker, L4 zero-trust OT remote access, L5 embedded agent for OEMs. Each is honestly labelled early access or coming soon until fully live — see each product page for current status. ## Pricing (https://adminkit.net/pricing/) Free plan: $0, public tools with no account, 25 L1 devices, 1 MCP gateway with 10,000 calls a month, 3 monitored assets. Builder, Business and MSP/Hosting plans show their real contents with "Talk to us for early-access pricing" — no published number, since the draft figures in the product spec are not confirmed yet. ## Guides (https://adminkit.net/guides/) ### ALIAS, ANAME and CNAME Flattening at the Apex | AdminKit (https://adminkit.net/guides/aname-alias-flattened-cname-at-the-apex-explained/) Status: live A zone's apex, the bare domain itself, needs an SOA and NS record, and RFC 1034 bars a CNAME from coexisting with any other record at the same name, so a real CNAME can never sit there. AdminKit explains what ALIAS, ANAME and CNAME flattening do instead: synthesize an A or AAAA answer, not add a new DNS record type. ### Is Your BACnet/IP Device Exposed? | AdminKit Guide (https://adminkit.net/guides/bacnet-ip-exposure/) Status: live BACnet/IP lets HVAC, lighting and access-control systems in a building talk to each other over UDP port 47808, and it has no built-in authentication — any device that can reach that port can send it commands. AdminKit's port-check tool only probes TCP today, so this guide explains how to check your UDP exposure manually. ### Certificate Transparency Logs Explained | AdminKit Guide (https://adminkit.net/guides/certificate-transparency-logs-explained/) Status: live Certificate Transparency (CT) is an open framework, defined in RFC 6962, that requires publicly trusted certificate authorities to publish every TLS certificate they issue into append-only, publicly auditable logs — so a domain owner, a browser, AdminKit's own SSL check, or anyone else can later discover that a certificate for their domain was issued, even one they never requested. ### Checking TLS Certificate Chain Completeness | AdminKit Guide (https://adminkit.net/guides/checking-tls-certificate-chain-completeness/) Status: live AdminKit's SSL/TLS check reports certificate chain completeness: whether a server sent every intermediate certificate between its leaf certificate and a trusted root, as RFC 5280's path-validation rules require. A chain can be individually valid at every link yet still fail for clients that will not fetch a missing intermediate themselves, unlike browsers that often cache or fetch one quietly. ### DNS Answers That Differ Between Resolvers | AdminKit (https://adminkit.net/guides/diagnosing-dns-answers-that-differ-between-resolvers/) Status: live AdminKit's DNS lookup tool often shows different answers from different resolvers, and most of the time that's normal: independent caching, deliberate geo-steering toward a closer answer, a network-level block or substitution, or a validating resolver refusing an answer a non-validating one accepts. A mismatch is a starting point for diagnosis, not proof that either resolver is broken. ### What Are CAA Records? | AdminKit Guide (https://adminkit.net/guides/caa-records-explained/) Status: live A Certification Authority Authorization (CAA) record is a DNS record that names which certificate authorities may issue TLS certificates for your domain; every publicly trusted CA must check for one before issuing, so a misconfigured CAA record can silently block your own renewals. AdminKit's DNS lookup tool shows a domain's current CAA records in seconds. ### BIMI, MTA-STS and TLS-RPT Explained | AdminKit Guide (https://adminkit.net/guides/bimi-mta-sts-tls-rpt-explained/) Status: live BIMI puts your verified logo next to your mail in a recipient's inbox, MTA-STS tells other mail servers to require encrypted delivery to yours instead of silently falling back to plaintext, and TLS-RPT reports when that encrypted delivery fails. AdminKit explains what each standard actually requires and how they fit together on top of SPF/DKIM/DMARC. ### Connect an AI Agent to the AdminKit MCP Server | AdminKit (https://adminkit.net/guides/connect-an-ai-agent-to-adminkits-mcp-server/) Status: live AdminKit's MCP server connects an AI agent to AdminKit's live network-check tools: adminkit-mcp, a real, free, open-source connector published on PyPI and listed in the MCP Registry. Install it with uvx adminkit-mcp to expose 13 tools backed by AdminKit's Check API, each returning an honest not-available response rather than fabricated data. ### Audit SPF and DMARC With an AI Agent | AdminKit (https://adminkit.net/guides/audit-spf-dmarc-with-an-ai-agent-and-mcp/) Status: live AdminKit's check_mail_auth tool lets an AI agent ask AdminKit's live Check API to read a domain's SPF and DMARC records and report whether outbound mail authentication is actually enforced, so you can audit SPF and DMARC posture from a chat prompt instead of decoding DNS TXT records by hand. ### Check if Your MCP Server Is Exposed With AdminKit (https://adminkit.net/guides/check-if-your-mcp-server-is-exposed-with-an-ai-agent/) Status: live AdminKit's check_mcp_endpoint tool lets an AI agent send a real, unauthenticated initialize and tools/list probe at an MCP server URL you give it, the same anonymous-access check behind AdminKit's public MCP exposure check, so you learn whether your server answers strangers before an attacker does. ### DKIM Selector Mistakes That Break Signing | AdminKit (https://adminkit.net/guides/dkim-selector-mistakes/) Status: live A DKIM signature fails verification for reasons that have nothing to do with the signature itself — the wrong selector, a DNS TXT record split incorrectly, or a public key too long for one record to hold are the most common causes. AdminKit explains how each breaks DKIM, and how to confirm a fix actually works. ### DMARC Alignment: Relaxed vs Strict Explained | AdminKit (https://adminkit.net/guides/dmarc-alignment-relaxed-vs-strict-explained/) Status: live DMARC's aspf and adkim tags decide how closely the domain authenticated by SPF or DKIM must match the visible From: address. AdminKit explains the real difference: relaxed alignment, the default, accepts a shared organizational domain, such as mail.example.com matching example.com, while strict alignment requires an exact match, which a subdomain-sending setup can silently fail. ### DNS Propagation and TTL Explained | AdminKit Guide (https://adminkit.net/guides/dns-propagation-ttl-explained/) Status: live A DNS change doesn't take effect everywhere at once because resolvers across the internet cache your old record until its TTL (time to live) expires — so-called "propagation delay" is really just caching behavior, predictable once you know a record's TTL. AdminKit's DNS lookup tool checks the live answer against a fresh resolver. ### What Is DNS Rebinding? | AdminKit Guide (https://adminkit.net/guides/dns-rebinding-attacks-explained/) Status: live DNS rebinding abuses the fact that a browser's same-origin policy trusts a hostname, not the IP behind it: an attacker's DNS server first answers with its own address to pass an initial check, then swaps the answer to a private address — letting a page you're viewing reach your own network. AdminKit's DNS lookup tool shows a hostname's current answer. ### DNSSEC Explained: What It Actually Protects | AdminKit Guide (https://adminkit.net/guides/dnssec-what-it-actually-protects/) Status: live DNSSEC adds cryptographic signatures to DNS responses so a validating resolver can confirm an answer wasn't altered or forged in transit, closing the gap that lets attackers forge DNS answers; it does not encrypt your DNS traffic or hide which domains you look up. AdminKit's DNS lookup tool shows a domain's DNSSEC status directly. ### DoH vs DoT: DNS-Privacy Tradeoffs | AdminKit Guide (https://adminkit.net/guides/doh-vs-dot-dns-privacy-tradeoffs/) Status: live DNS-over-HTTPS (DoH) and DNS-over-TLS (DoT) both encrypt DNS queries so a network observer can't read which domains you're looking up, but they differ in one practical way: DoT runs on its own port and is trivial to block, while DoH blends in with ordinary HTTPS traffic on port 443, which AdminKit's DNS resolver test can help you tell apart. ### What Happens When a Domain Expires? | AdminKit Guide (https://adminkit.net/guides/domain-expiry-and-renewal-check/) Status: live AdminKit's domain expiry check reads a domain's registry expiry date and status codes directly from WHOIS/RDAP. A missed renewal doesn't delete a domain immediately: ICANN's Expired Registration Recovery Policy requires reminder notices, then a renewal window, then a 30-day redemption period at a steep fee — only after that does the name become available for anyone else to register. ### Dynamic IP vs CGNAT vs Static: Why It Matters | AdminKit (https://adminkit.net/guides/dynamic-ip-cgnat-monitoring/) Status: live A dynamic IP changes periodically but is yours alone while assigned; a CGNAT IP is shared with other customers right now and may also change; a static IP is yours and stable. AdminKit explains why the difference matters: any security check tied to 'your IP address' only describes a single moment, not an ongoing state, unless something keeps re-checking it. ### Email Bounces and Backscatter Explained | AdminKit Guide (https://adminkit.net/guides/email-bounce-and-backscatter-explained/) Status: live A bounce is a notification a mail server generates when it can't deliver a message, sent to the original envelope sender per RFC 5321. Backscatter happens when a spammer forges that sender as an innocent third party's address, so bounces from a misconfigured server land on someone who never sent anything. AdminKit's MX lookup shows who handles a domain's mail. ### Why Email Forwarding Breaks SPF | AdminKit Guide (https://adminkit.net/guides/email-forwarding-breaks-spf-srs-arc/) Status: live AdminKit's SPF check can flag forwarded mail as a failure even though nothing is broken: SPF authorizes sending IPs against a published list, and a forwarding server resends a message without rewriting the original sender address, so it's never on that domain's SPF list. SRS rewrites the envelope sender to fix it; ARC preserves the original authentication results instead. ### Evaluating HTTP Security Header Strength | AdminKit Guide (https://adminkit.net/guides/evaluating-http-security-header-policy-strength/) Status: live AdminKit's HTTP security headers check reports whether a header is present, but presence alone isn't strength: judging a policy means reading its actual value against known-weak or known-strong patterns, since a Content-Security-Policy, an HSTS max-age, or a Referrer-Policy can each be technically present while providing close to none of the protection it's meant for. ### Find Open Ports You Own, From an AI Assistant (https://adminkit.net/guides/find-open-ports-you-own-from-your-ai-assistant/) Status: live AdminKit's check_owned_ports tool lets an AI agent ask AdminKit's live Check API which of a fixed set of nine commonly-exposed TCP ports are open on a target you have verified you own, so your assistant can flag a forgotten Telnet port without running its own network scan. ### Glue Records and Lame Delegation Explained | AdminKit Guide (https://adminkit.net/guides/glue-records-and-lame-delegation/) Status: live AdminKit's DNS lookup can surface two related delegation faults: glue records and lame delegation. A parent zone's NS records sometimes point to a name server inside the domain being delegated, which glue records (RFC 8499) solve by supplying that server's address directly. Lame delegation is the case where a listed name server isn't serving the zone at all. ### DMARC Aggregate Reports and Rollout to Reject | AdminKit (https://adminkit.net/guides/dmarc-aggregate-reports-rollout/) Status: live DMARC aggregate reports tell you, per sending source, how much mail passed or failed SPF and DKIM alignment — the only reliable way to know whether moving your policy to quarantine or reject will block legitimate mail or just spam. AdminKit's DMARC check and this guide walk through reading a report and a staged, safe rollout. ### Set Up AdminKit's Home Assistant Add-on | AdminKit Guide (https://adminkit.net/guides/home-assistant-protective-dns-add-on-setup/) Status: live AdminKit's Home Assistant Supervisor add-on builds the DNS-over-HTTPS URL for AdminKit's planned L1 Protective DNS and serves per-device connection and blocked-query counts for Home Assistant's built-in rest sensor to poll. It is real, tested code, but its public repository isn't published yet — ask us for early access, and read on for what it does. ### How to Check for MCP Tool Poisoning | AdminKit (https://adminkit.net/guides/how-to-check-for-mcp-tool-poisoning/) Status: live Tool poisoning is when a malicious MCP server's tool description hides instructions meant for the AI agent reading it, not the user — a risk invisible in a normal UI. AdminKit's MCP endpoint check lets you read a server's full tool list and descriptions before connecting an agent to it, so you can check for exactly this. ### Is Port 123 (NTP) Exposed? | AdminKit (https://adminkit.net/guides/how-to-check-if-port-123-ntp-is-exposed/) Status: live Port 123/UDP runs NTP, the protocol computers use to sync clocks, and an NTP server that answers anyone can be abused to flood a third party with amplified replies; AdminKit's open ports check scans a fixed set of TCP ports today, so confirming UDP/123 exposure still takes one manual command run from outside your own network. ### How to File an Abuse Report from a WHOIS Result | AdminKit (https://adminkit.net/guides/how-to-file-an-abuse-report-from-a-whois-result/) Status: live AdminKit's WHOIS/RDAP lookup finds the right abuse contact, but filing the report well is a separate job: what you send, how specific and well-evidenced it is, and whether you're reporting to the registrar or the IP block's network operator all decide whether it gets acted on. ICANN's accreditation rules only require registrars to investigate reports that are well-formed. ### Find a Dangling CNAME Subdomain Takeover Risk | AdminKit (https://adminkit.net/guides/how-to-find-a-dangling-cname-subdomain-takeover-risk/) Status: live A dangling CNAME still resolves in DNS but points at a cloud resource, CDN endpoint or hosting slot you've since deleted or stopped renewing, letting whoever claims that same name on the provider's side serve content from your subdomain instead; AdminKit's live DNS lookup tool shows exactly which target a CNAME currently points at, the first step in spotting one. ### How to Get Delisted From Barracuda | AdminKit (https://adminkit.net/guides/how-to-get-delisted-from-barracuda/) Status: live The Barracuda Reputation Block List (BRBL) flags IPs sending mail that Barracuda's systems associate with spam or abuse, and Barracuda publishes its own free lookup and removal-request tools for checking and clearing a listing. AdminKit's blacklist check, coming soon, will confirm a listing directly; this guide covers Barracuda's own public removal procedure. ### How to Get Delisted From Microsoft / Outlook | AdminKit (https://adminkit.net/guides/how-to-get-delisted-from-microsoft-outlook/) Status: live AdminKit's guide to Microsoft/Outlook delisting starts with the bounce itself: a non-delivery report naming 'Access denied, banned sending IP' or 'banned sender' points to one of two separate removal processes depending on the exact error code, and Outlook.com's consumer service sometimes points further to a third-party list like Spamhaus. This covers the public procedure only — Microsoft decides the outcome. ### How to Harden a Home or SMB MQTT Broker | AdminKit (https://adminkit.net/guides/how-to-harden-a-home-smb-mqtt-broker/) Status: live Closing the port an MQTT broker listens on stops internet exposure, but it doesn't fix a broker that still accepts anonymous connections, has no access control between topics, and sends every message in plaintext. AdminKit explains the broker-side settings that matter once anything beyond your own machine, including other devices on the same local network, can reach it. ### How to Get Delisted From Spamhaus | AdminKit Guide (https://adminkit.net/guides/how-to-get-delisted-from-spamhaus/) Status: live AdminKit's guide to Spamhaus delisting starts with identifying which list flagged you: SBL, XBL, PBL and CSS each have a distinct cause and a distinct public removal procedure, and knowing which one applies determines what to fix before requesting removal. This covers the public procedure only; neither Spamhaus nor AdminKit can guarantee removal time or success. ### How to Harden RDP (Port 3389) Exposure | AdminKit (https://adminkit.net/guides/how-to-harden-rdp-3389-exposure/) Status: live Removing a direct port forward to RDP closes the most urgent gap, but a deployment still lacking Network Level Authentication and a real remote-access plan stays fragile — this guide covers the access-architecture work that makes RDP resilient, not just unreachable. Port 3389 isn't on AdminKit's port-check tool's nine-port list, so checking reachability takes a manual step covered below. ### How to Publish and Test MTA-STS | AdminKit (https://adminkit.net/guides/how-to-publish-and-test-mta-sts/) Status: live MTA-STS lets your domain require that incoming mail only be delivered over TLS with a valid, matching certificate, closing a silent-downgrade gap that ordinary opportunistic STARTTLS leaves open; publish the DNS record plus an HTTPS policy file, then confirm your mail hosts actually resolve with AdminKit's live MX lookup tool before you tighten enforcement. ### How to Read a DKIM Check Result | AdminKit Guide (https://adminkit.net/guides/how-to-read-a-dkim-check-result/) Status: live AdminKit's DKIM check looks up one selector's TXT record — the label a mail provider assigns to one of several keys a domain publishes — and reading the result means checking p= for a valid base64 public key, k= for the signing algorithm, and whether an empty p= means the key was revoked rather than never published. ### How to Read a DMARC Check Result | AdminKit Guide (https://adminkit.net/guides/how-to-read-a-dmarc-check-result/) Status: live AdminKit's DMARC check reads your domain's _dmarc TXT record tag by tag: p is the headline policy (none, quarantine or reject) for mail failing SPF or DKIM alignment, sp sets a separate policy for subdomains, pct controls what fraction of failing mail it applies to, rua/ruf are reporting addresses, and adkim/aspf set how strictly the From: domain must match. ### How to Read a MAC Vendor Lookup Result | AdminKit Guide (https://adminkit.net/guides/how-to-read-a-mac-address-vendor-lookup-result/) Status: live AdminKit's MAC vendor lookup result tells you one of three things: a matched manufacturer name means the address's first three bytes, its OUI, were factory-assigned to that company by IEEE; no match means the prefix isn't in the public registry; and a locally-administered or randomized flag means the address was never vendor-assigned, so there is no manufacturer to find. ### How to Read a DNS Lookup Result | AdminKit Guide (https://adminkit.net/guides/how-to-read-a-dns-lookup-result/) Status: live AdminKit's DNS lookup tool returns one record type per query: A/AAAA give the IPv4 or IPv6 address a hostname points to, CNAME gives an alias, MX gives mail servers and priority, TXT gives arbitrary text such as SPF strings, and NS gives the authoritative name servers for the zone — a lookup only shows the type you asked for. ### How to Read a Reverse DNS PTR Lookup Result | AdminKit (https://adminkit.net/guides/how-to-read-a-reverse-dns-ptr-lookup-result/) Status: live AdminKit's reverse DNS (PTR) lookup returns exactly one thing: the hostname published for an IP address in a special reverse zone, in-addr.arpa for IPv4 or ip6.arpa for IPv6, set by whoever controls that address block, not by you. A hostname means someone configured one; no result almost always just means no one did, not that anything is broken. ### How to Read a TLS/SSL Certificate Result | AdminKit (https://adminkit.net/guides/how-to-read-a-tls-ssl-certificate-check-result/) Status: live A TLS/SSL certificate check returns specific facts — who issued the certificate, which hostnames it covers, when it expires, and whether the chain back to a trusted root is complete — and connection safety comes down to reading those fields correctly, not just seeing a green padlock. AdminKit's SSL/TLS check tool reads all four. ### How to Read a WHOIS/RDAP Lookup Result | AdminKit Guide (https://adminkit.net/guides/how-to-read-a-whois-rdap-lookup-result/) Status: live AdminKit's WHOIS/RDAP lookup returns different fields depending on the target: for a domain, its registrar, key dates (registration, last changed, expiry), status codes controlling transfer or deletion, and its authoritative nameservers; for an IP address, the allocated block, the assigned organization, and the regional registry that manages it. ### How to Read an HTTP Security Headers Result | AdminKit Guide (https://adminkit.net/guides/how-to-read-an-http-security-headers-result/) Status: live AdminKit's HTTP security headers result lists each recommended response header — CSP, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options or frame-ancestors, Referrer-Policy and Permissions-Policy — as present or missing, with the exact value sent for each one present, because presence alone doesn't say whether the policy it carries is strict enough to do its job. ### How to Read an MCP Endpoint Check Result | AdminKit Guide (https://adminkit.net/guides/how-to-read-an-mcp-endpoint-check-result/) Status: live AdminKit's MCP endpoint check comes down to one question answered in two steps: did the server's initialize call succeed without credentials, and if so, did tools/list then reveal which tools it exposes? An MCP server that accepts both from anyone is callable by any AI agent or script that finds its URL, not just the one it was built for. ### How to Read an MX Lookup Result | AdminKit Guide (https://adminkit.net/guides/how-to-read-an-mx-lookup-result/) Status: live AdminKit's MX lookup result lists the mail hosts a domain has published, each with a priority number, then shows whether each host actually resolves to an IP address: a lower number is tried first, hosts sharing one priority are an equally-ranked group, and a host with no A/AAAA record is a stale entry that cannot receive mail despite still appearing. ### How to Read an Open Ports Scan Result | AdminKit Guide (https://adminkit.net/guides/how-to-read-an-open-ports-on-my-ip-scan-result/) Status: live AdminKit's open ports on my IP result reports, for each of nine TCP ports, whether something on your public IP accepted a connection within a timeout — nothing more. Reading it means matching each open port to the device behind it, since a Telnet port left open needs a far more urgent fix than a deliberately exposed admin web UI. ### How to Read an SVCB/HTTPS DNS Record | AdminKit Guide (https://adminkit.net/guides/how-to-read-an-svcb-https-dns-record/) Status: live AdminKit's DNS lookup can show SVCB and HTTPS records, defined in RFC 9460, which publish connection hints for a service: which ALPN protocols it speaks, a non-default port, or fallback IPs, directly in the DNS answer, so a client opens a faster connection without guessing first. A resolver that doesn't recognize the type falls back to an A/AAAA lookup. ### How to Rotate a DKIM Key Without Breaking Mail | AdminKit (https://adminkit.net/guides/how-to-rotate-a-dkim-key-without-breaking-mail/) Status: live AdminKit's DKIM check can confirm each step of a key rotation, which isn't as simple as swapping one DNS record: mail in transit when you switch keeps the old signature, and some receivers may still see the old selector. Publish the new key under a new selector, run both in parallel for an overlap period, then retire the old one. ### How to Secure an MCP Server | AdminKit Guide (https://adminkit.net/guides/how-to-secure-an-mcp-server/) Status: live AdminKit's guide to securing an MCP server covers three layers: require OAuth authorization per the MCP specification, limit which tools a client can call with an allowlist, and treat every tool response as untrusted input that could carry prompt-injection content — not just lock the front door and assume the rest is safe. ### How to Secure an MQTT Broker | AdminKit Guide (https://adminkit.net/guides/how-to-secure-an-mqtt-broker/) Status: live Secure an MQTT broker by requiring authentication for every connection, disabling anonymous access, encrypting traffic with TLS on port 8883 instead of plaintext 1883, and restricting each client to the topics it needs with an access-control list. AdminKit explains the order that matters, since authentication without TLS still leaks credentials in transit. ### HSTS and HSTS Preload Explained | AdminKit Guide (https://adminkit.net/guides/hsts-and-hsts-preload-explained/) Status: live AdminKit's HTTP security headers check reports HSTS, defined in RFC 6797: a header telling a browser to never load a site over plain HTTP again, closing off downgrade and cookie-hijacking attacks on an unencrypted first request. HSTS preload extends protection to a visitor's first connection by baking the policy into the browser, at the cost of a slow removal process. ### Subdomain Delegation NS/Glue Mismatch Guide | AdminKit (https://adminkit.net/guides/interpreting-subdomain-delegation-ns-glue-mismatch/) Status: live AdminKit's DNS lookup can surface a subdomain delegation mismatch: delegating a subdomain to its own name servers is a zone-file change, not a registrar change. When the parent zone's NS records don't match the subdomain's own servers, or glue is missing, resolution breaks in a way that's easy to misdiagnose as a registrar problem. ### IPv6 at Home: Why No NAT Means a Firewall | AdminKit (https://adminkit.net/guides/ipv6-home-devices-need-a-firewall/) Status: live AdminKit explains why IPv6 removes the accidental protection IPv4 NAT gave home networks: NAT hides devices behind one shared address, acting like a firewall nobody configured. IPv6 gives every device its own globally routable address instead, so an actual firewall — not NAT — is what stands between your devices and the internet. ### IPv6 SLAAC and EUI-64 Addressing Explained | AdminKit Guide (https://adminkit.net/guides/ipv6-slaac-and-eui-64-addressing-explained/) Status: live AdminKit explains how IPv6 SLAAC and EUI-64 addressing work together: SLAAC lets a device build its own routable address from a router's advertised /64 prefix plus a 64-bit interface identifier, and EUI-64 is one way to build that identifier — directly from the device's MAC address, which can expose its hardware identity across networks. ### Is My Router's DNS Hijacked? | AdminKit Guide (https://adminkit.net/guides/is-my-router-dns-hijacked/) Status: live DNS hijacking means something — malware, a compromised router, or an attacker with stolen credentials — changed which DNS resolver your traffic uses, letting it quietly redirect you to fake sites or intercept lookups. AdminKit explains the signs and how to confirm which resolver you're actually using; a mismatch from what you expect is the clearest sign. ### Is Your DNS Resolver an Open Resolver? | AdminKit (https://adminkit.net/guides/is-your-dns-resolver-an-open-resolver/) Status: live An open DNS resolver answers recursive queries from any client on the internet, not just its intended users, which attackers abuse to flood a spoofed victim with amplified replies; AdminKit's DNS lookup tool is live today for checking any domain's own records, while AdminKit's resolver-identification tool, which names which resolver answers your queries, is coming soon. ### Randomized and Locally-Administered MAC Addresses | AdminKit (https://adminkit.net/guides/mac-address-randomization-and-locally-administered-addresses-explained/) Status: live AdminKit explains what randomized and locally-administered MAC addresses are: one bit in a MAC address's first byte marks whether it was factory-assigned by a manufacturer or generated locally, and modern phones deliberately randomize that address per network so the device can't be tracked across networks — which is also why a MAC vendor lookup finds nothing for it. ### Does Your Mail Server Enforce STARTTLS? | AdminKit Guide (https://adminkit.net/guides/mail-server-starttls-check/) Status: live STARTTLS lets two mail servers upgrade a plaintext SMTP connection to an encrypted one, but by default that upgrade is opportunistic, not mandatory — if an attacker sitting on the network path strips out the STARTTLS offer, most mail servers will simply fall back to sending the message in plaintext. AdminKit explains the gap and how MTA-STS closes it. ### The MCP Confused Deputy Problem | AdminKit Guide (https://adminkit.net/guides/mcp-confused-deputy-token-passthrough/) Status: live A confused-deputy vulnerability happens when an MCP server with legitimate access to a third-party API can be tricked into misusing that access on an attacker's behalf. AdminKit explains the single most common way it happens in MCP deployments today: a server forwarding a client's access token straight through to a downstream API instead of validating and re-issuing its own. ### MCP Tool Annotations Explained | AdminKit Guide (https://adminkit.net/guides/mcp-tool-annotations-explained/) Status: live AdminKit explains what MCP tool annotations actually promise: a Model Context Protocol tool definition can carry readOnlyHint, destructiveHint, idempotentHint and openWorldHint, signaling what calling the tool will do to the world. The specification is explicit that these are hints a server declares about itself, not a guarantee a client can independently verify before trusting them. ### mDNS, SSDP and UPnP: LAN Discovery Explained | AdminKit (https://adminkit.net/guides/mdns-ssdp-upnp-lan-discovery-leaks/) Status: live mDNS, SSDP and UPnP let devices on a local network find each other automatically, and all three work by broadcasting information — device names, models, available services — to anything listening on the same network segment, which is convenient on a trusted home LAN and a quiet information leak on any network an attacker can reach. AdminKit explains the risk. ### Migrating Email Providers Without Breaking Mail | AdminKit (https://adminkit.net/guides/migrating-email-providers-without-breaking-spf-dkim-dmarc/) Status: live AdminKit walks through migrating email providers without breaking SPF, DKIM or DMARC: SPF must authorize the new provider before the old one is removed, DKIM needs the new selector live and verified before signing moves over, and DMARC alignment can fail silently for any sending source you haven't added — sequencing is what prevents a week of bounced mail. ### Modbus TCP 502 Remediation Playbook | AdminKit (https://adminkit.net/guides/modbus-tcp-502-remediation-playbook/) Status: live Blocking inbound access to port 502 stops the most urgent exposure, but a Modbus TCP deployment that still sits on a flat network, with no monitoring and no plan for legitimate remote maintenance, remains one misconfigured firewall rule away from being reachable again — AdminKit's Modbus check and this playbook cover the network-architecture work that makes the fix durable. ### Open Redis and Unauthenticated Databases | AdminKit Guide (https://adminkit.net/guides/open-redis-exposure-check/) Status: live Redis, like several other popular data stores, ships out of the box with no password required to connect, assuming only trusted clients will ever reach it — an assumption that breaks the moment a server gets a public IP. These database ports aren't on AdminKit's port-check tool's nine-port list, so this guide shows how to check whether yours is exposed. ### Point OpenWrt at AdminKit Protective DNS | AdminKit Guide (https://adminkit.net/guides/openwrt-protective-dns-package-setup/) Status: live AdminKit's adminkit-dns OpenWrt package configures dnsmasq to forward LAN DNS to AdminKit's planned L1 Protective DNS resolvers and publishes a metadata-only snapshot of per-device connection and block activity, with device IDs hashed rather than raw MAC addresses. It is real, tested code, but its public repository isn't published yet — ask us for early access. ### Protective DNS for UK Small Businesses | AdminKit Guide (https://adminkit.net/guides/protective-dns-for-uk-small-businesses/) Status: live Protective DNS blocks lookups of known-malicious domains before your device connects to them, but the UK's National Cyber Security Centre (NCSC) runs its own free Protective DNS service only for the public sector and schools; a typical small business doesn't qualify. AdminKit explains what NCSC's own guidance recommends instead. ### PTR Records and Reverse DNS for Mail Servers | AdminKit (https://adminkit.net/guides/ptr-records-and-reverse-dns-for-mail-servers/) Status: live AdminKit explains why a PTR record matters for mail delivery: it resolves an IP back to a hostname, the reverse of an A/AAAA lookup, and receiving mail servers often check that a sending IP has one that also resolves forward to the same address — forward-confirmed reverse DNS — so a missing or mismatched PTR commonly gets mail rejected. ### RDP and VNC Exposed to the Internet | AdminKit Guide (https://adminkit.net/guides/rdp-vnc-internet-exposure/) Status: live Remote Desktop Protocol (port 3389) and VNC (port 5900) both give a remote user an interactive desktop session, and both are flagged by U.S. and international cybersecurity agencies as common ransomware entry points. Neither port is on AdminKit's port-check tool's nine-port list, so this guide shows how to check whether yours is reachable from the internet. ### Finding an Abuse Contact in a WHOIS/RDAP Result | AdminKit (https://adminkit.net/guides/reading-a-whois-rdap-result-to-find-an-abuse-contact/) Status: live AdminKit explains how to find the right abuse contact in a WHOIS or RDAP result: a domain's abuse contact is the registrar's ICANN-required address, exposed in RDAP as an entity with the role "abuse"; an IP's abuse contact instead belongs to whichever regional registry (ARIN, RIPE NCC, APNIC, LACNIC, AFRINIC) holds that block — the two are looked up differently. ### Securing an Exposed Telnet Device (Beyond Off) | AdminKit (https://adminkit.net/guides/securing-an-exposed-telnet-device/) Status: live Disabling Telnet closes the most dangerous gap immediately, but devices that genuinely need remote command-line access still need an answer for what replaces it, and devices that can't be fully replaced or patched yet still need network-level controls in the meantime. AdminKit explains how to check your own exposure and migrate to SSH instead. ### What Is an SOA Record? | AdminKit Guide (https://adminkit.net/guides/soa-records-explained/) Status: live AdminKit explains the SOA record, the one record every DNS zone has exactly one of: it names the zone's primary name server and admin contact alongside five numeric timers — serial, refresh, retry, expire and minimum — that control how secondaries stay in sync and how long a "name doesn't exist" answer is cached before a stale serial causes trouble. ### Security Gateway for MCP Servers | AdminKit Guide (https://adminkit.net/guides/security-gateway-for-mcp-servers/) Status: live AdminKit explains what a security gateway for MCP servers does: it's a proxy placed in front of one or more Model Context Protocol servers that enforces OAuth authorization, limits which tools a caller can invoke, and logs every call — centralizing controls that matter most once you run more than one MCP server or front one you don't control. ### SPF, DKIM and DMARC Explained | AdminKit Guide (https://adminkit.net/guides/spf-dkim-dmarc-explained/) Status: live SPF lists which servers may send mail for your domain, DKIM cryptographically signs messages so receivers can verify they weren't altered, and DMARC tells receivers what to do when a message fails both — and where to send reports. AdminKit explains how the three work together and how to check your own domain's setup. ### Fixing SPF Too Many DNS Lookups (PermError) | AdminKit (https://adminkit.net/guides/spf-too-many-dns-lookups/) Status: live SPF has a hard limit of 10 DNS lookups per check, set by RFC 7208, and going even one over turns the entire check into a PermError, not a soft warning, so mail can fail authentication even though every sender is legitimate. AdminKit's SPF check counts your lookups; here's how to fix an over-limit record. ### Scan an MCP Endpoint in CI | AdminKit Guide (https://adminkit.net/guides/scan-mcp-endpoint-in-ci-github-action/) Status: live AdminKit has built a composite GitHub Action that scans an MCP endpoint for anonymous-access exposure on every push or a schedule, using the same read-only probe as the public MCP server's check_mcp_endpoint tool — no AdminKit account needed to run it. The public repository it ships from isn't published yet; ask us for early access. ### Subnet and CIDR Basics Explained | AdminKit Guide (https://adminkit.net/guides/subnet-and-cidr-basics-reading-a-subnet-calculator-result/) Status: live AdminKit explains how to read a subnet calculator result: given an address and a CIDR prefix like /24, it returns the network address, the broadcast address (IPv4 only), the usable host range between them, and the total host count — because the prefix length is what splits any IP address into a fixed network portion and a variable host portion. ### Telnet and RTSP: Why Cameras Stay Exposed | AdminKit Guide (https://adminkit.net/guides/telnet-rtsp-camera-exposure/) Status: live Telnet (port 23) gives an unauthenticated or weakly-authenticated plaintext admin shell, and RTSP (port 554) streams live video, and both still ship enabled by default on huge numbers of consumer routers and IP cameras — not because they're secure, but because they're old and nobody removed them. AdminKit's port check flags both. ### TR-069 and Port 7547: When ISP Access Is a Risk | AdminKit (https://adminkit.net/guides/tr-069-port-7547-exposure/) Status: live AdminKit explains TR-069, also called CWMP, the protocol many ISPs use over port 7547 to remotely configure the router they gave you — genuinely useful for the ISP, but in November 2016 a flaw in how some routers handled TR-069's related TR-064 commands let a Mirai botnet variant knock roughly 900,000 Deutsche Telekom customers offline in a single weekend. ### User-Agent Client Hints Explained | AdminKit Guide (https://adminkit.net/guides/user-agent-client-hints-explained/) Status: live AdminKit explains why the User-Agent header is shrinking: for decades, one freely-readable User-Agent string carried a browser's name, version, engine and OS. Chromium-based browsers now send a shorter, more generic default string and move the detailed information behind an opt-in mechanism, User-Agent Client Hints, that a server must explicitly request via separate Sec-CH-UA headers. ### Using a Subnet Calculator to Plan VLANs | AdminKit (https://adminkit.net/guides/using-a-subnet-calculator-to-plan-a-vlan-or-multi-subnet-network/) Status: live AdminKit walks through using a subnet calculator to plan VLANs from one address block: decide the maximum hosts each VLAN needs, pick the smallest CIDR prefix that covers that count plus headroom, then carve each VLAN's range out of the parent block in sequence so none overlap — variable-length subnet masking, sizing each VLAN to what it needs. ### Using MAC Vendor Lookup to Spot a Rogue Device | AdminKit (https://adminkit.net/guides/using-mac-vendor-lookup-to-spot-a-rogue-device/) Status: live AdminKit explains how a MAC vendor lookup helps identify an unfamiliar device on your network: it narrows an address down to a registered manufacturer, which combined with the device's IP, hostname and behavior is often enough to identify a known gadget rather than an intruder — with honest limits, since randomization (RFC 9542) and spoofing can both defeat the lookup. ### Using Port Check to Inventory IoT Device Exposure | AdminKit (https://adminkit.net/guides/using-port-check-to-inventory-iot-device-exposure/) Status: live AdminKit's port check tool tests nine commonly misconfigured TCP ports on the public IP you're connecting from, and while it can't enumerate every device at once, running it from each site you operate and matching results against a port-to-device table turns a one-off exposure check into a running inventory of what's reachable from the internet, and whether that has changed. ### Reverse DNS for Investigating an Unfamiliar IP | AdminKit (https://adminkit.net/guides/using-reverse-dns-to-investigate-an-unfamiliar-ip-in-your-logs/) Status: live AdminKit explains how reverse DNS helps investigate an unfamiliar IP in your logs: a PTR lookup turns the address into a hostname, often the fastest first clue to what it is — a cloud provider, a generic residential-ISP name, or nothing at all. A PTR record isn't verified against anything, so treat it as a lead to pair with WHOIS/RDAP. ### How to Verify Crawler User-Agent Claims | AdminKit Guide (https://adminkit.net/guides/verifying-a-crawlers-user-agent-claim-with-reverse-dns/) Status: live A User-Agent header claiming to be Googlebot, GPTBot or ClaudeBot is just a string the client chose to send — nothing verifies it automatically. Google documents a reverse-DNS method to confirm its crawlers; OpenAI and Anthropic instead publish IP address lists. AdminKit's reverse DNS and DNS lookup tools run the check that actually applies to each crawler. ### How to Verify DANE/TLSA for a Mail Server | AdminKit Guide (https://adminkit.net/guides/verifying-dane-tlsa-for-a-mail-server/) Status: live DANE uses a DNSSEC-signed TLSA record (RFC 6698) to publish exactly which TLS certificate a mail server should present, so a receiver can detect a forged certificate instead of trusting any certificate authority. RFC 7672 defines how SMTP servers use this to make STARTTLS downgrade-resistant. AdminKit's SSL/TLS check tool shows the certificate a mail server actually presents. ### What a User-Agent String Reveals | AdminKit Guide (https://adminkit.net/guides/what-a-user-agent-string-reveals/) Status: live A User-Agent string is a header your browser sends with every request, typically naming the browser, its rendering engine, the operating system and a coarse device type — but it's entirely self-reported, so any software can set it to any value. AdminKit's User-Agent tool shows exactly what yours reveals; treat the result as a hint, never a verified fact. ### What an SPF Check Result Means | AdminKit Guide (https://adminkit.net/guides/what-an-spf-check-result-means/) Status: live An SPF check doesn't return a single pass/fail answer — RFC 7208 defines seven outcomes (Pass, Fail, SoftFail, Neutral, None, PermError, TempError), and which one you get depends on whether the sending IP matches your record's mechanisms and which qualifier is attached to the match. AdminKit's SPF check tool reports exactly which outcome your own record currently produces. ### What Is CGNAT and Why It Confuses Sites | AdminKit (https://adminkit.net/guides/what-is-cgnat/) Status: live CGNAT (Carrier-Grade NAT) is when your ISP shares one public IP address across many customers at once, so a website sees that shared address, not just you. AdminKit's My IP tool can show whether you are behind it, which explains unexplained CAPTCHAs, shared blacklist status, and why port forwarding sometimes doesn't work. ### What Is a DNS Zone Transfer (AXFR)? | AdminKit Guide (https://adminkit.net/guides/what-is-dns-zone-transfer-axfr/) Status: live AXFR (Authoritative Transfer) is the DNS mechanism a secondary name server uses to copy an entire zone from a domain's primary server, designed to run only between a domain's own authorized servers; answering an AXFR request from anyone on the internet instead hands out a complete map of the domain's hostnames. AdminKit explains how to check and fix it. ### What MX Record Priority Actually Does | AdminKit Guide (https://adminkit.net/guides/what-mx-record-priority-actually-does/) Status: live An MX record's priority (preference) number tells sending mail servers which mail host to try first: the lowest number goes first, higher numbers are fallbacks if lower-priority hosts are unreachable, and records sharing one priority form an equally ranked group a sender may try in any order. AdminKit's MX lookup tool shows each host's priority and whether it resolves. ### What Your IP Lookup Result Actually Shows | AdminKit (https://adminkit.net/guides/what-your-ip-lookup-result-actually-shows/) Status: live A public IP lookup, like AdminKit's what-is-my-IP tool, shows your address plus three derived fields read from network registration data, not your device: the ASN (network operator identifier), an organization name (usually your ISP or cloud provider), and an approximate location based on where that address block is registered — not GPS, and often a city or country off. ### When an MX Record Points to a CNAME | AdminKit (https://adminkit.net/guides/when-mx-record-points-to-cname/) Status: live An MX record must name a host with its own address record, but it's easy to end up pointing one at a CNAME instead — often by reusing a hostname a CDN already told you to alias. RFC 2181 says this is invalid, not just discouraged. AdminKit's MX lookup tool helps confirm which case applies. ### Why Is My IP Address Blacklisted? | AdminKit Guide (https://adminkit.net/guides/why-is-my-ip-blacklisted/) Status: live Your IP is blacklisted because a spam trap, malware sensor or abuse report tied suspicious traffic back to it — often from a compromised device or a neighbour on a shared IP, not you personally. AdminKit walks through checking which list flagged you, fixing the cause, then requesting removal. ### Wildcard vs SAN Certificates Explained | AdminKit (https://adminkit.net/guides/wildcard-vs-san-certificates-explained/) Status: live A wildcard certificate like *.example.com and a multi-domain SAN certificate solve the same problem, covering more than one hostname, in different ways with different limits. AdminKit explains what each actually covers: a wildcard matches exactly one subdomain label under one base domain, while a SAN certificate lists an explicit, individually validated set of hostnames, including entirely different domains. ## Programmatic port checks (https://adminkit.net/guides/) ### Is Modbus TCP (Port 502) Exposed? | AdminKit (https://adminkit.net/guides/is-modbus-tcp-502-exposed/) Status: live Modbus TCP, the industrial protocol used by countless PLCs and controllers, has no built-in authentication at all. If a Modbus device is reachable on port 502 from the public internet, anything that can connect to it can typically read registers and, often, write to them; AdminKit's Modbus check tool shows whether yours is exposed. ### Is Port 11211 (Memcached) Exposed? | AdminKit (https://adminkit.net/guides/is-port-11211-memcached-exposed/) Status: live Memcached is a fast in-memory cache that ships with no authentication and no network restriction by default — its own project documentation says plainly it must not be exposed to the internet. CISA has measured its DDoS amplification factor at up to 51,000x. AdminKit's port-check tool automates nine common exposure checks today; here's how to check 11211 yourself. ### Is Port 1521 (Oracle) Exposed? | AdminKit (https://adminkit.net/guides/is-port-1521-oracle-exposed/) Status: live Port 1521 is the port Oracle's database listener uses by long-standing convention — IANA's own registry actually lists it under a different, older assignment. An internet-reachable listener can hand an unauthenticated caller a database's version and service names before any credential is checked. AdminKit's port-check tool automates nine common exposure checks today; here's how to check 1521 yourself. ### Is Port 161 (SNMP) Exposed? | AdminKit (https://adminkit.net/guides/is-port-161-snmp-exposed/) Status: live Port 161 is the default port for SNMP, the protocol network gear uses for monitoring and remote configuration. SNMPv1 and v2c authenticate with a plaintext "community string," and many devices still ship with the default read string "public" unchanged. AdminKit's port-check tool automates nine exposure checks today; 161 isn't on that list yet, so here's how to check it yourself. ### Is Port 1883 (MQTT) Open on My Router? | AdminKit (https://adminkit.net/guides/is-port-1883-mqtt-open/) Status: live Port 1883 is the default port for MQTT, a lightweight messaging protocol used by smart-home hubs, sensors and IoT platforms. If it's reachable from the public internet and the broker accepts anonymous connections — which the protocol allows by default — anyone who finds it can read or send messages; AdminKit's port-check tool shows if yours is reachable. ### Is Port 21 (FTP) Exposed? | AdminKit (https://adminkit.net/guides/is-port-21-ftp-exposed/) Status: live Port 21 is the default control port for FTP, a 1980s file-transfer protocol that sends usernames and passwords as plain, unencrypted text over the network. Port 21 isn't on AdminKit's port-check tool's current nine-port list, so this guide shows how to manually confirm your own public IP still answers on it before an intercepted credential becomes a real breach. ### Is Port 22 (SSH) Exposed? | AdminKit (https://adminkit.net/guides/is-port-22-ssh-exposed/) Status: live Port 22 is the default port for SSH, used for encrypted remote administration of servers and network devices. CISA has warned that any internet-reachable SSH service draws automated scanning and brute-force login attempts within minutes of going online. Port 22 isn't on AdminKit's port-check tool's current nine-port list, so this guide shows how to confirm your own exposure manually. ### Is Port 23 (Telnet) Exposed? | AdminKit (https://adminkit.net/guides/is-port-23-telnet-exposed/) Status: live AdminKit explains why port 23, Telnet's default port, keeps showing up exposed: it's a plaintext remote-administration protocol with no built-in encryption, still enabled by default on many consumer routers, cameras and NVRs. A device reachable on port 23 lets anyone who finds it try default or weak credentials for a full admin shell. ### Is Port 2375 (Docker API) Exposed? | AdminKit (https://adminkit.net/guides/is-port-2375-docker-api-exposed/) Status: live AdminKit explains why an exposed port 2375 is one of the worst findings a check can return: it's IANA's registered port for the Docker Engine API in plain text, and Docker's daemon runs as root and can mount the host filesystem — so a reachable, unauthenticated API there is equivalent to an unauthenticated root shell. ### Is Port 27017 (MongoDB) Exposed? | AdminKit (https://adminkit.net/guides/is-port-27017-mongodb-exposed/) Status: live Port 27017 is MongoDB's IANA-registered default port. Before version 3.6, MongoDB's binaries bound to all network interfaces by default with authentication off, so a database stood up with no extra configuration was immediately reachable and writable from the internet. 27017 isn't on AdminKit's port-check tool's nine-port list, so this guide explains how to confirm manually whether yours is exposed. ### Is Port 3306 (MySQL) Exposed? | AdminKit (https://adminkit.net/guides/is-port-3306-mysql-exposed/) Status: live Port 3306 is MySQL's default port, and a MySQL server listens on every interface unless restricted, so a public IP can make the database reachable from the whole internet. Port 3306 isn't on AdminKit's port-check tool's current nine-port list, so this guide shows how to confirm exposure manually — exposed MySQL root accounts have been a documented ransomware target. ### Is Port 3389 (RDP) Exposed? | AdminKit (https://adminkit.net/guides/is-port-3389-rdp-exposed/) Status: live Port 3389 is the default port for Microsoft's Remote Desktop Protocol (RDP), giving a remote user an interactive desktop session. AdminKit's port-check tool automates nine exposure checks today; 3389 isn't on that list yet, so this guide shows how to confirm your exposure, which a joint CISA/FBI advisory names a common ransomware infection vector. ### Is Port 389 (LDAP) Exposed? | AdminKit (https://adminkit.net/guides/is-port-389-ldap-exposed/) Status: live Port 389 is the default port for LDAP, the protocol most directory services use to look up users and groups. LDAP allows an unauthenticated "anonymous bind," and even an authenticated bind can send the password in clear text. AdminKit's port-check tool automates nine exposure checks today; 389 isn't on that list yet, so here's how to confirm it yourself. ### Is Port 445 (SMB) Exposed? | AdminKit (https://adminkit.net/guides/is-port-445-smb-exposed/) Status: live AdminKit explains why port 445, used by Windows' SMB file-sharing protocol, should never face the internet: SMB was never designed for untrusted networks, an old SMBv1 flaw (EternalBlue, CVE-2017-0144) let WannaCry and NotPetya spread with no credentials needed, and CISA still names SMB a high-risk service to block at the network boundary. ### Is Port 47808 (BACnet/IP) Exposed? | AdminKit (https://adminkit.net/guides/is-port-47808-bacnet-exposed/) Status: live AdminKit explains why an exposed port 47808 matters for building operators: it's the UDP port BACnet/IP uses to let HVAC, lighting and access-control systems talk to a central controller, and because BACnet/IP was designed in 1995 with no built-in authentication, anything that can reach port 47808 can typically send it commands. ### Is Port 5432 (PostgreSQL) Exposed? | AdminKit (https://adminkit.net/guides/is-port-5432-postgresql-exposed/) Status: live Port 5432 is PostgreSQL's IANA-registered default port. PostgreSQL's defaults are actually safe — it listens on localhost only — but listen_addresses and pg_hba.conf get changed together often enough that weakly-authenticated, internet-reachable instances keep turning up. AdminKit's port-check tool automates nine exposure checks today; 5432 isn't on that list yet, so here's how to check it yourself. ### Is Port 5683 (CoAP) Exposed? | AdminKit (https://adminkit.net/guides/is-port-5683-coap-exposed/) Status: live AdminKit explains why an exposed port 5683 is a DDoS risk, not just a privacy one: CoAP, the IoT protocol that defaults to this UDP port, supports optional DTLS encryption that many devices skip, and because a small CoAP request can trigger a much larger response, exposed devices get abused to flood unrelated third parties. ### Is Port 554 (RTSP) Exposed? | AdminKit (https://adminkit.net/guides/is-port-554-rtsp-exposed/) Status: live AdminKit explains why port 554, RTSP's default port, is a common camera-exposure finding: RTSP streams live video from IP cameras, NVRs and doorbells but has no built-in authentication or encryption, so a camera reachable on port 554 without a separately configured username and password can let anyone with the right URL watch the feed. ### Is Port 5900 (VNC) Exposed? | AdminKit (https://adminkit.net/guides/is-port-5900-vnc-exposed/) Status: live Port 5900 is the default port for VNC, a remote-desktop protocol. Like RDP, it's named in U.S. cybersecurity advisories as a common ransomware entry point, and VNC's classic authentication caps the password at 8 characters, making an exposed server easy to brute-force. 5900 isn't on AdminKit's port-check tool's nine-port list, so this guide explains how to check your exposure manually. ### Is Port 6379 (Redis) Exposed? | AdminKit (https://adminkit.net/guides/is-port-6379-redis-exposed/) Status: live Port 6379 is Redis's default port, and Redis ships with no password required, assuming only trusted clients will ever reach it. A 2018 Imperva study found roughly 75% of internet-reachable Redis servers it scanned were already compromised. AdminKit's port-check tool automates nine exposure checks today; 6379 isn't on that list yet, so here's how to check your exposure manually. ### Is Port 7547 (TR-069) Exposed? | AdminKit (https://adminkit.net/guides/is-port-7547-tr069-exposed/) Status: live Port 7547 runs TR-069 (CWMP), the protocol many ISPs use to remotely configure the router they gave you — a legitimate management channel, but in November 2016 a Mirai botnet variant used a flaw in how some routers handled a command over this port to knock roughly 900,000 Deutsche Telekom customers offline in a weekend. AdminKit explains the risk. ### Is Port 8080 (Admin Panel) Exposed? | AdminKit (https://adminkit.net/guides/is-port-8080-admin-panel-exposed/) Status: live Port 8080 is a common alternate HTTP port, and on routers, cameras, NAS boxes and other appliances it's frequently where the device's own admin panel listens, often in plaintext. CISA's 2023 directive on exposed management interfaces treats this as high-risk enough to require federal agencies to remove it within 14 days; AdminKit's port-check tool flags it on your IP. ### Is Port 8883 (MQTTS) Exposed? | AdminKit (https://adminkit.net/guides/is-port-8883-mqtts-exposed/) Status: live AdminKit explains why TLS on port 8883 alone doesn't secure an MQTT broker: 8883 is MQTT's encrypted counterpart to plaintext port 1883, and while TLS protects data in transit, it says nothing about who may connect — a TLS-wrapped broker that still accepts anonymous connections is just as exposed as an unencrypted one once connected. ### Is Port 9200 (Elasticsearch) Exposed? | AdminKit (https://adminkit.net/guides/is-port-9200-elasticsearch-exposed/) Status: live Port 9200 is Elasticsearch's default HTTP port, the interface for search and index requests. Before version 8.0, Elasticsearch's security features were opt-in and disabled by default, so a new node would answer unauthenticated requests to read, modify or delete any index. 9200 isn't on AdminKit's port-check tool's nine-port list, so this guide explains how to confirm and secure your exposure. ## Comparisons (https://adminkit.net/compare/) ### Best free BIMI record checkers (2026) | AdminKit (https://adminkit.net/compare/best-free-bimi-checkers/) Last checked: 2026-11-07 AdminKit's BIMI check reads a domain's published DNS record for free, no account, and flags the prerequisite most BIMI records miss — an enforcing DMARC policy; EasyDMARC, Red Sift and dmarcian go further by also reading the SVG logo and the Verified Mark Certificate itself, which AdminKit, MxToolbox and BIMI Group's own Inspector don't check. ### Best free DKIM record checkers (2026) | AdminKit (https://adminkit.net/compare/best-free-dkim-record-checkers/) Last checked: 2026-11-04 AdminKit's DKIM check looks up a published DKIM selector's TXT record for a domain and validates its key syntax with AdminKit's own code; MxToolbox, EasyDMARC, dmarcian and mail-tester each run a similar free domain-plus-selector DKIM lookup, and EasyDMARC additionally offers to auto-detect a domain's selectors rather than requiring one already known, per each tool's own page. ### Best free DNS and email deliverability checkers | AdminKit (https://adminkit.net/compare/best-free-dns-email-deliverability-checkers/) Last checked: 2026-10-26 MxToolbox leads this roundup of eight free DNS and email-deliverability checkers, checking a domain or IP against 105+ DNS-based blacklists; DNSChecker, AdminKit, EasyDMARC, dmarcian, mail-tester, Google Admin Toolbox and intoDNS round out the ranking against five published criteria, with AdminKit landing third because its blacklist check is still coming with the AdminKit API, not live today. ### Best free DNS leak test tools (2026) | AdminKit (https://adminkit.net/compare/best-free-dns-leak-test-tools/) Last checked: 2026-10-26 DNSLeakTest.com's Extended test sends 6 rounds of 6 queries (36 total) to surface every server in a load-balanced resolver pool (dnsleaktest.com/what-is-the-difference.html, read 2026-10-26), the deepest check among five free DNS-leak tools ranked here against four published criteria; AdminKit lands last because its own resolver test is still coming with the AdminKit API, not live today. ### Best Free DNS Lookup Tools (2026) | AdminKit (https://adminkit.net/compare/best-free-dns-lookup-tools/) Last checked: 2026-11-04 AdminKit's DNS lookup tool queries nine record types (A, AAAA, MX, TXT, NS, CAA, PTR, SOA, CNAME) through Cloudflare's resolver and explains each one in plain language; MXToolbox queries a domain's authoritative nameserver directly, Google's Dig tool offers a raw dig-style view, nslookup.io lets you pick the resolver, and intoDNS runs a configuration health check instead of a plain lookup. ### Best Free DNS Propagation Checkers (2026) | AdminKit (https://adminkit.net/compare/best-free-dns-propagation-checkers/) Last checked: 2026-11-07 AdminKit's free DNS propagation check queries four named public resolvers — Cloudflare, Google, Quad9 and OpenDNS — and returns one propagated-or-diverging verdict per record type; nslookup.io checks over 30 resolvers across six continents, whatsmydns.net and ViewDNS.info show per-location maps instead, and AdminKit ranks fourth of six on published breadth, verdict-clarity and API criteria. ### Best Free DNSSEC Checkers (2026) | AdminKit (https://adminkit.net/compare/best-free-dnssec-checkers/) Last checked: 2026-11-07 AdminKit's free DNSSEC check returns a live secure, insecure or bogus verdict for any domain in one request; DNSViz draws a full visual chain-of-trust diagram, Verisign Labs' DNSSEC Debugger adds custom trust-anchor and alternate-nameserver options for rollover troubleshooting, and AdminKit ranks last of five on published diagnostic-depth criteria. ### Best Free HTTP Security Header Analyzers (2026) | AdminKit (https://adminkit.net/compare/best-free-http-security-header-analyzers/) Last checked: 2026-11-04 AdminKit's free HTTP security-headers check reports each recommended response header present or missing, with its actual value and a plain-language fix hint; SecurityHeaders.com and Mozilla's HTTP Observatory instead compute a single letter grade, and Hardenize folds headers into a much broader free TLS, DNS and mail-security report. ### Best free IPv6 address tools (2026) | AdminKit (https://adminkit.net/compare/best-free-ipv6-address-tools/) Last checked: 2026-11-07 AdminKit's IPv6 info tool takes a pasted IPv6 address and reports its expanded and RFC 5952 compressed forms, its prefix/interface-id split, its address category, and converts a MAC to or from its modified EUI-64 id, all offline in one tool; ipaddressguide.com, subnetonline.com, subnetcalculator.dev and ipbittools.com each cover only part of that set, per their own pages. ### Best free MAC vendor (OUI) lookup tools | AdminKit (https://adminkit.net/compare/best-free-mac-address-vendor-lookup-tools/) Last checked: 2026-11-03 All four tools in this comparison look up a MAC address's IEEE-registered vendor for free with no account: macvendors.com and maclookup.app also publish developer APIs, and maclookup.app's own docs already flag locally-administered or randomized addresses and report the IEEE block size the way AdminKit's MAC vendor lookup does. ### Best free MTA-STS checkers (2026) | AdminKit (https://adminkit.net/compare/best-free-mta-sts-checkers/) Last checked: 2026-11-07 AdminKit's MTA-STS check reads a domain's published DNS record and policy file for free, no account, showing the real mode, MX hosts and max_age it declares; Hardenize, MxToolbox and EasyDMARC each run a similar free lookup, and Hardenize alone also opens a live connection to confirm the listed mail servers present a matching TLS certificate. ### Best free MX record lookup tools (2026) | AdminKit (https://adminkit.net/compare/best-free-mx-record-lookup-tools/) Last checked: 2026-11-04 AdminKit's MX lookup resolves a domain's mail-exchanger records in priority order, then resolves each host's A/AAAA record so you can see which can actually receive mail; MxToolbox's MX Lookup Tool runs the same priority-ordered lookup plus live SMTP and blacklist diagnostics, while DNSChecker, Google Admin Toolbox and intoDNS run a broadly similar MX check, per their own pages. ### Best free open port check tools (2026) | AdminKit (https://adminkit.net/compare/best-free-open-port-check-tools/) Last checked: 2026-11-03 AdminKit's open-port check scans only the public IP address you are connecting from, against a fixed list of nine high-risk IoT and OT ports, with the restriction enforced server-side; canyouseeme.org, yougetsignal.com, portchecker.co and ping.eu instead let you type in any host and, mostly, any port number, trading that built-in safety limit for far broader arbitrary coverage. ### Best free reverse DNS (PTR) lookup tools (2026) | AdminKit (https://adminkit.net/compare/best-free-reverse-dns-ptr-lookup-tools/) Last checked: 2026-11-04 AdminKit resolves an IPv4 or IPv6 address to its PTR hostname with no account; ViewDNS.info, MxToolbox and nslookup.io do the same automatic IP-to-PTR conversion, verified 2026-11-04, though ViewDNS.info masks the hostname behind a sign-in prompt per AdminKit's existing test. Google Admin Toolbox Dig supports PTR lookups only once you build the reverse name yourself; dnschecker.org blocked every read. ### Best free SPF and DMARC checkers | AdminKit (https://adminkit.net/compare/best-free-spf-dmarc-checkers/) Last checked: 2026-10-23 Four of the five tools in this roundup — AdminKit, MxToolbox, EasyDMARC (90,000 customers across 130+ countries, easydmarc.com, read 2026-10-23) and dmarcian — run a free, no-account SPF/DMARC/DKIM checker today; intoDNS is included for completeness even though its own report covers general DNS/mail-server health, not a dedicated SPF/DMARC check. ### Best free SSL/TLS certificate checkers (2026) | AdminKit (https://adminkit.net/compare/best-free-ssl-tls-certificate-checker-tools/) Last checked: 2026-11-04 AdminKit's SSL/TLS check reads a certificate's subject, issuer, expiry and negotiated protocol/cipher from one live handshake, with no account and no public results page. Qualys SSL Labs, Hardenize and ImmuniWeb's SSL Test each check deeper: full chain validation, a letter grade, or a downloadable PDF report, per their own pages verified 2026-11-04. ### Best free subnet calculators, compared | AdminKit (https://adminkit.net/compare/best-free-subnet-calculators/) Last checked: 2026-10-29 All three subnet calculators in this comparison are free with no account required, but they differ in scope: subnet-calculator.com is IPv4-only and classful, while calculator.net and AdminKit's subnet calculator both handle IPv4 and IPv6 with CIDR notation. AdminKit's is the only one whose own page states the math runs entirely in your browser. ### Best free TLS-RPT checkers (2026) | AdminKit (https://adminkit.net/compare/best-free-tls-rpt-checkers/) Last checked: 2026-11-07 AdminKit's TLS-RPT check reads a domain's `_smtp._tls` DNS record for free, no account, and reads back its real `rua` report destination, telling the three states apart: published, published with no destination, or not published; MxToolbox and EasyDMARC each run a similar free existence/validity check, per their own pages, and Hardenize's bundled report reads back the destination too. ### Best Free User-Agent Parser Tools (2026) | AdminKit (https://adminkit.net/compare/best-free-user-agent-parser-tools/) Last checked: 2026-11-04 AdminKit's free User agent tool reads your browser's own User-Agent string entirely client-side and breaks it into browser, engine, OS and device type, with no account and no server round trip; WhatIsMyBrowser.com, UserAgentString.com, User-Agents.net and WhatMyUserAgent.com each parse User-Agent strings too, but with different mixes of reference databases, developer APIs and paid tiers. ### Best free what is my IP tools (2026) | AdminKit (https://adminkit.net/compare/best-free-what-is-my-ip-tools/) Last checked: 2026-11-04 AdminKit shows your public IPv4/IPv6 address, ISP/ASN, approximate location and a CGNAT hint, computed per request and served with Cache-Control: no-store so nothing is retained; ifconfig.co offers a similar free, no-account lookup with a documented JSON/curl API, while whatismyipaddress.com, ipchicken.com and whatismyip.com could not be verified here because their pages blocked every automated read for this comparison. ### Best free WHOIS lookup tools (2026) | AdminKit (https://adminkit.net/compare/best-free-whois-lookup-tools/) Last checked: 2026-11-04 AdminKit's Whois/RDAP tool runs a free, no-account, browser-direct lookup for a domain or IP with no historical archive, monitoring or API; who.is adds 2B+ historical Whois/RDAP snapshots since 2007 plus paid domain-monitoring alerts and a JSON API, while whois.com and MXToolbox WHOIS each run a similar free live lookup without who.is's deeper feature set, per their own pages verified 2026-11-04. ### MCP Gateway options compared: DIY vs hosted | AdminKit (https://adminkit.net/compare/mcp-gateway-options-compared/) Last checked: 2026-10-23 The MCP Authorization specification requires OAuth 2.1, audience-bound tokens and a ban on token passthrough for any MCP server acting as a deputy to a third-party API (modelcontextprotocol.io/specification/2025-06-18/basic/authorization, read 2026-10-23); this page prices what meeting that bar yourself costs in engineering time with Envoy or the FastMCP framework against AdminKit's planned hosted gateway, without benchmarking named enterprise identity vendors. ### DNSChecker vs MxToolbox: which is better? | AdminKit (https://adminkit.net/compare/dnschecker-vs-mxtoolbox/) Last checked: 2026-10-26 Neither tool clearly wins for diagnosing email and DNS problems: MxToolbox checks a domain or IP against 105+ DNS-based blacklists, while DNSChecker checks DNS propagation across 100+ global server locations and runs a six-signal Email Verifier. Pick MxToolbox for blacklist depth, DNSChecker for propagation checks, and AdminKit's free SPF, DKIM, DMARC and MX checks alongside either. ### MXToolbox alternatives for SPF, DKIM, DMARC | AdminKit (https://adminkit.net/compare/mxtoolbox-alternatives-spf-dkim-dmarc/) Last checked: 2026-10-26 DNSChecker already matches MxToolbox's SPF, DKIM and DMARC tools for free and adds a six-signal Email Verifier — SPF, DKIM, DMARC, MTA-STS, TLS-RPT and BIMI in one pass (dnschecker.org/email-verifier, read 2026-10-26); AdminKit, EasyDMARC, dmarcian, mail-tester and Google Admin Toolbox round out six ranked alternatives to MxToolbox's own SPF/DKIM/DMARC tools, with gaps this page states plainly. ### AdminKit vs whatismyipaddress.com and ipinfo.io | AdminKit (https://adminkit.net/compare/vs-ip-lookup-tools/) Last checked: 2026-10-23 ipinfo.io's free tier covers only country-level geolocation and ASN data — city-level location, carrier data and privacy detection need a paid plan starting at $26/month — while AdminKit's what-is-my-IP tool is free with CGNAT detection and resolver visibility built in. whatismyipaddress.com's content could not be independently verified for this comparison. ### AdminKit vs MCPScan.ai: an honest comparison | AdminKit (https://adminkit.net/compare/vs-mcpscan-ai/) Last checked: 2026-10-29 There is no widely established, direct public equivalent to AdminKit's live MCP endpoint check the way Qualys SSL Labs is for TLS. The closest public tool, MCPScan.ai, instead scans a GitHub repository's MCP server source code for vulnerabilities including authentication weaknesses — a different mechanism, not a smaller or larger version of the same check. ### AdminKit vs Dig Web Interface: DNS lookup | AdminKit (https://adminkit.net/compare/vs-dig-web-interface/) Last checked: 2026-10-29 digwebinterface.com's own page lets you query dozens of DNS record types against a chosen resolver, the authoritative server, or a nameserver you specify, free with no account beyond a CAPTCHA after 100 lookups in 24 hours. AdminKit's DNS lookup tool covers the nine record types most people need, always through Cloudflare's resolver, with a simpler result. ### AdminKit vs MxToolbox: an honest comparison | AdminKit (https://adminkit.net/compare/vs-mxtoolbox/) Last checked: 2026-10-27 MxToolbox checks a domain or IP against 100+ DNS-based blacklists and has run free email/DNS tools since 2004 (mxtoolbox.com/blacklists.aspx, read 2026-10-23); AdminKit's angle is a newer, single-report UX across IP, DNS and mail-authentication checks today, not greater DNSBL coverage, which this page states plainly rather than implying parity that doesn't exist yet. ### AdminKit vs NextDNS and Control D | AdminKit (https://adminkit.net/compare/vs-protective-dns/) Last checked: 2026-10-27 Control D states a 99.98% malware block rate for its DNS filtering service, and NextDNS offers unlimited per-profile DNS-firewall configurations with no signup required to try it. AdminKit's own Protective DNS is planned, not live, so this page explains the category through NextDNS's and Control D's public positioning. ### AdminKit vs Qualys SSL Labs: an honest comparison | AdminKit (https://adminkit.net/compare/vs-qualys-ssl-labs/) Last checked: 2026-10-29 Qualys SSL Labs performs, in its own words, "a deep analysis of the configuration of any SSL web server on the public Internet," grading it A+ through F across certificate chain, protocol, cipher and handshake-simulation detail. AdminKit's SSL/TLS check is a faster, single-handshake read of the certificate and negotiated protocol/cipher — SSL Labs goes deeper. ### AdminKit vs SecurityHeaders.com, compared | AdminKit (https://adminkit.net/compare/vs-securityheaders-com/) Last checked: 2026-10-29 SecurityHeaders.com, a Snyk project, has logged more than 405 million scans and grades a URL's response headers A+ down to F. AdminKit's HTTP security-headers check reads the same kind of response headers but reports each one present or missing with its actual value, rather than a single letter grade. ### AdminKit vs ViewDNS.info: reverse DNS lookup | AdminKit (https://adminkit.net/compare/vs-viewdns-reverse-dns/) Last checked: 2026-10-29 A live test of ViewDNS.info's Reverse DNS Lookup tool for a known IP (viewdns.info, read 2026-10-29) returned the correct PTR hostname but masked it as "xxx.xxxxxx" until signing in; AdminKit's reverse DNS tool shows the full PTR result with no account, though ViewDNS is part of a much wider 25+-tool site that AdminKit's single-purpose tool doesn't try to match. ### AdminKit vs Shodan and Censys: Honest Comparison (https://adminkit.net/compare/vs-shodan-censys/) Last checked: 2026-10-23 Shodan states more than 3 million registered users search its device index (shodan.io, read 2026-10-23), and Censys states its map of the internet is used by 119+ government organizations (censys.com, read 2026-10-23); AdminKit works the opposite way, checking only the IP making the request or a verified asset, and does not index other people's devices. ### AdminKit vs who.is: honest WHOIS/RDAP comparison | AdminKit (https://adminkit.net/compare/vs-who-is/) Last checked: 2026-10-29 who.is runs a free, no-account Whois/RDAP lookup backed by over 2 billion historical snapshots since 2007 (who.is, read 2026-10-29), plus paid domain-monitoring and API tiers; AdminKit's Whois/RDAP tool is a newer, free, no-account, fully client-side live lookup with no historical archive, monitoring or API, which this page states plainly rather than implying a feature set AdminKit doesn't have. ### AdminKit vs WhatIsMyBrowser.com | AdminKit (https://adminkit.net/compare/vs-whatismybrowser/) Last checked: 2026-10-29 WhatIsMyBrowser.com's own homepage says it decodes a visitor's User-Agent string to show "what browser, operating system and device you are using," and sells a separate User Agent Parsing API with paid tiers up to $99 AUD/month. AdminKit's User agent tool shows the same kind of breakdown for free with no account, parsed entirely client-side. ## Glossary (https://adminkit.net/glossary/) ### 464XLAT (https://adminkit.net/glossary/464xlat/) 464XLAT, defined in RFC 6877, lets an IPv4-only app keep working on a mobile network that only assigns IPv6 addresses, by combining a device-side translator (CLAT) with a provider-side NAT64 gateway (PLAT). AdminKit's My IP tool shows whether a connection is actually IPv6-only, the condition that makes 464XLAT necessary in the first place. ### A record (https://adminkit.net/glossary/a-record/) An A record is the basic DNS record type that maps a hostname to an IPv4 address, defined in RFC 1035. A domain can publish several for the same name to spread traffic across servers. AdminKit's DNS lookup tool queries a domain's A records alongside AAAA, MX, TXT, NS and CAA in one lookup. ### A2A (Agent2Agent Protocol) (https://adminkit.net/glossary/a2a-protocol/) A2A (Agent2Agent Protocol) is an open spec letting independent AI agents, built on different frameworks, discover each other's capabilities via a published Agent Card and delegate tasks between them. It solves a different problem than MCP: MCP connects an agent to tools, A2A connects one agent to another. AdminKit's MCP & Agent Gateway has that kind of delegation in mind. ### AAAA record (https://adminkit.net/glossary/aaaa-record/) An AAAA record maps a hostname to an IPv6 address, the job an A record does for IPv4, defined in RFC 3596. A dual-stack domain publishes both, letting a resolver pick whichever address family the path supports. AdminKit's DNS lookup tool queries AAAA alongside A, MX, TXT, NS and CAA, so a missing AAAA record is easy to spot. ### ACME protocol (https://adminkit.net/glossary/acme-protocol/) ACME, defined in RFC 8555, lets a server prove it controls a domain and receive a signed TLS certificate automatically, with no human filling out a CA request form by hand. It's what makes short-lived certificates practical, like Let's Encrypt's 90-day ones. AdminKit's SSL/TLS check can confirm the validity window of a certificate an ACME client like Let's Encrypt issued. ### ARP (Address Resolution Protocol) (https://adminkit.net/glossary/address-resolution-protocol/) Address Resolution Protocol (ARP), defined in RFC 826, maps a device's IPv4 address to its MAC address on a local network, since hardware needs a MAC address to deliver a frame. ARP has no built-in authentication, which is the basis of ARP spoofing. AdminKit's MAC lookup tool looks up the vendor behind the same MAC address ARP resolves. ### ALPN (Application-Layer Protocol Negotiation) (https://adminkit.net/glossary/alpn/) ALPN (Application-Layer Protocol Negotiation) is a TLS extension, defined in RFC 7301, letting a client and server agree which protocol -- h2 or http/1.1 -- to run over a connection inside the TLS handshake, before any data is sent. That negotiation happens inside the same handshake AdminKit's SSL/TLS check inspects, though its result doesn't surface the negotiated protocol. ### Anycast (https://adminkit.net/glossary/anycast/) Anycast is a network addressing technique where the same IP address is announced from many physical locations, and internet routing delivers each client's traffic to the nearest or best-performing instance. AdminKit's DNS Lookup tool queries Cloudflare's public DNS-over-HTTPS resolver, a well-known anycast deployment, on your behalf. ### ARC (Authenticated Received Chain) (https://adminkit.net/glossary/arc-authenticated-received-chain/) ARC (Authenticated Received Chain) lets each server in an email forwarding chain sign a record of what a message's SPF, DKIM and DMARC results looked like before that hop forwarded it onward. AdminKit's guide explains how ARC preserves authentication results across a forwarding chain that would otherwise fail SPF. ### ARF (Abuse Reporting Format) (https://adminkit.net/glossary/arf-abuse-reporting-format/) ARF (Abuse Reporting Format), defined in RFC 5965, is a machine-readable email format mailbox providers use to report one specific message back to its sender, most often a spam complaint. It's the format behind classic ISP feedback-loop programs and DMARC's optional ruf reports. AdminKit's guide to blacklisting explains how this per-message signal compares to reputation-based blacklisting. ### ARP spoofing (https://adminkit.net/glossary/arp-spoofing/) ARP spoofing (ARP poisoning) is an attack on a local IPv4 network where a device sends forged ARP replies claiming to own an IP address belonging to another host, such as the router, letting it intercept or redirect traffic -- a classic man-in-the-middle setup. AdminKit's subnet calculator shows which devices share the broadcast domain this attack depends on. ### ASN (https://adminkit.net/glossary/asn/) An ASN (Autonomous System Number) is a unique identifier assigned to a network -- an ISP, cloud provider, or company -- that controls its own block of IP addresses and routing policy on the internet. AdminKit's WHOIS tool looks up the ASN and operator behind any IP or domain, which is often more useful than the registered owner name alone. ### ASPA (Autonomous System Provider Authorization) (https://adminkit.net/glossary/aspa-autonomous-system-provider-authorization/) ASPA (Autonomous System Provider Authorization), defined in RFC 9582, is a signed RPKI object stating which autonomous systems are authorized as an AS's upstream providers, letting a router reject a BGP path with a forged hop even when the origin AS looks valid. AdminKit's Whois/RDAP tool checks an IP block's holder and AS number, the relationships ASPA validates. ### Authentication-Results header (https://adminkit.net/glossary/authentication-results-header/) The Authentication-Results header (RFC 8601) records the SPF, DKIM, and DMARC verdicts a receiving mail server already computed, so downstream systems can read what was verified instead of repeating the checks. AdminKit's guide to SPF, DKIM, and DMARC explains the three checks this header reports the results of. ### Authoritative nameserver (https://adminkit.net/glossary/authoritative-nameserver/) An authoritative nameserver holds a DNS zone's actual source-of-truth records and is the server a recursive resolver ultimately queries for an answer it doesn't already have cached. AdminKit's whois tool looks up which nameservers a domain's registrar has on file, so you can confirm they match what you intentionally configured. ### Backscatter (email) (https://adminkit.net/glossary/backscatter/) Backscatter is the bounce traffic a mail server generates when it accepts a message and only later finds it can't be delivered, sending the bounce to whatever forged address the message claimed as sender -- landing in an innocent party's inbox. AdminKit's guide to email bounces covers spotting it. ### BACnet (https://adminkit.net/glossary/bacnet/) BACnet (Building Automation and Control Networking protocol) is a communication standard used to connect and control building-automation equipment: HVAC, lighting, access control and fire and life-safety systems. BACnet/IP, which runs on UDP port 47808, has no built-in authentication or encryption, so AdminKit's port check tool can confirm whether a building's automation network is reachable from the open internet. ### BCP 38 (Source Address Validation) (https://adminkit.net/glossary/bcp38-source-address-validation/) BCP 38, published as RFC 2827, is the IETF best-practice rule that network operators filter outbound traffic at the network edge, dropping any packet whose source address isn't actually authorized for that network. AdminKit's My IP tool shows your own visible address -- exactly what BCP 38 filtering at your edge stops someone else from forging. ### BGP announcement (https://adminkit.net/glossary/bgp-announcements/) A BGP announcement is a message, defined by RFC 4271, that a network's router sends its neighbors declaring it can route traffic to a given IP block, identified by its ASN. AdminKit's WHOIS lookup shows which network operator and ASN a given IP address's BGP announcements actually point to. ### BGP community (https://adminkit.net/glossary/bgp-communities/) A BGP community, defined in RFC 1997, is an optional tag a router attaches to a BGP announcement so neighboring networks can apply routing policy -- prefer, de-prioritize, or null-route it -- without a bespoke filter for every case. AdminKit's WHOIS tool looks up the ASN behind a route before checking its community values. ### BGP hijacking (https://adminkit.net/glossary/bgp-hijacking/) BGP hijacking is when a network operator falsely announces, via the Border Gateway Protocol, that it owns a block of IP addresses it does not actually control, rerouting other networks' traffic through it. AdminKit's Whois tool checks who actually holds an IP block to help spot a hijack. ### BGP route leak (https://adminkit.net/glossary/bgp-route-leak/) A BGP route leak, as RFC 7908 defines it, is a route announcement that propagates beyond the scope its sender, receiver or an AS along the path intended, most often from an accidental misconfiguration rather than a deliberate attack. AdminKit's Whois/RDAP tool looks up the ASN and network operator behind a route, the relationships a leak crosses without authorization. ### BIMI (https://adminkit.net/glossary/bimi/) BIMI (Brand Indicators for Message Identification) is a DNS TXT record that lets a domain show its verified logo next to its messages in supporting inboxes like Gmail, but only once DMARC is enforced at p=quarantine or p=reject. AdminKit's SPF, DKIM and DMARC guide covers that DMARC prerequisite before a domain adds BIMI. ### Bogon address (https://adminkit.net/glossary/bogon-address/) A bogon is an IP address that should never appear on the public internet -- unallocated by IANA, or reserved for private, loopback or documentation use. Firewalls filter bogon traffic as likely spoofed or misconfigured. AdminKit's My IP tool shows your own visible address, which should never itself be a bogon. ### Broadcast address (https://adminkit.net/glossary/broadcast-address/) A broadcast address is the all-host-bits-set address at the top of an IPv4 subnet, delivering one packet to every device on it at once -- 192.168.1.255 on a /24, for example. AdminKit's subnet calculator works out a subnet's broadcast and network addresses automatically from any CIDR block you enter. ### Catch-all address (https://adminkit.net/glossary/catch-all-address/) A catch-all address is a mail server setting that delivers messages sent to any address at a domain -- even ones never created -- to one inbox instead of bouncing them, which also makes the domain an easy target for spammers harvesting addresses. AdminKit's guide to bounces and backscatter explains how to avoid that cost. ### CAA record (https://adminkit.net/glossary/caa-record/) A CAA (Certification Authority Authorization) record is a DNS entry naming which certificate authorities may issue TLS certificates for a domain; without one, any publicly trusted CA can issue if it passes that CA's own validation. AdminKit's DNS lookup tool checks a domain's records, including CAA. ### CDS/CDNSKEY record (https://adminkit.net/glossary/cds-cdnskey-record/) A CDS or CDNSKEY record, defined in RFC 7344, lets a DNSSEC-signed domain automate updating the DS record its parent zone publishes, instead of a human copying a key fingerprint into a registrar panel by hand. AdminKit's DNSSEC guide covers the stale-DS-record failure this automation exists to prevent. ### Certificate authority (CA) (https://adminkit.net/glossary/certificate-authority/) A certificate authority (CA) is an organization trusted, under the X.509 framework in RFC 5280, to verify a domain's identity and sign a TLS certificate vouching for it, chained back to a root that browsers trust directly. AdminKit's SSL check tool shows the certificate authority and chain a live site actually presents. ### Certificate chain (https://adminkit.net/glossary/certificate-chain/) A certificate chain is the ordered sequence of certificates, per RFC 5280's path-validation rules, linking a server's TLS certificate up through one or more intermediate certificates to a root a client already trusts. AdminKit's SSL/TLS check inspects whether a server actually sends every certificate in that chain, since a missing intermediate breaks validation for clients that won't fetch it themselves. ### Certificate Pinning (https://adminkit.net/glossary/certificate-pinning/) Certificate pinning constrains a client to accept only a specific certificate or public key for a given host, instead of trusting any certificate chaining to a trusted root, as formalized for HTTP in RFC 7469's Public-Key-Pins header. AdminKit's guide to certificate chain completeness explains the broader trust model pinning narrows. ### CRL (certificate revocation list) (https://adminkit.net/glossary/certificate-revocation-list/) A certificate revocation list (CRL) is a certificate authority's signed, periodically published list of certificate serial numbers it has revoked before their stated expiry, defined in RFC 5280's X.509 standard. AdminKit's SSL check tool shows a live certificate's details, including which revocation mechanism -- CRL or OCSP -- it actually references. ### Certificate Transparency (CT) log (https://adminkit.net/glossary/certificate-transparency-log/) A Certificate Transparency (CT) log, defined in RFC 6962, is an append-only, publicly auditable record that every trusted certificate authority must publish each TLS certificate into before browsers treat it as valid. AdminKit's guide to monitoring CT logs explains how to catch a mis-issued certificate for your own domain. ### CGNAT (https://adminkit.net/glossary/cgnat/) CGNAT (Carrier-Grade NAT) is how an ISP shares one public IPv4 address across many customers at once, common on mobile networks, instead of giving each subscriber its own address. AdminKit's My IP tool shows whether your visible address sits in RFC 6598's 100.64.0.0/10 CGNAT range, which affects blacklist status and inbound port forwarding for everyone sharing it. ### CIDR (Classless Inter-Domain Routing) (https://adminkit.net/glossary/cidr/) CIDR (RFC 4632) is the slash-notation system -- an address followed by a bit count, like 192.168.1.0/24 -- for sizing and routing IP address blocks, replacing the old fixed address classes. AdminKit's subnet calculator takes any CIDR block and works out its network range, mask and usable host count. ### Cipher suite (https://adminkit.net/glossary/cipher-suite/) A cipher suite is the specific combination of cryptographic algorithms a client and server negotiate for a TLS connection; RFC 8446 simplified TLS 1.3's naming to just an AEAD cipher plus a hash. AdminKit's SSL check tool shows the TLS version and cipher suite a live site actually negotiates. ### CNAME record (https://adminkit.net/glossary/cname-record/) A CNAME record, defined in RFC 1035, is a DNS entry that makes one domain name an alias for another, telling resolvers to look up the target name instead of returning an address directly. AdminKit's DNS lookup tool resolves CNAME records alongside A, MX, TXT and other record types. ### CoAP (https://adminkit.net/glossary/coap/) CoAP (Constrained Application Protocol, RFC 7252) is a lightweight, RESTful protocol for low-power IoT and sensor devices, running over UDP instead of a full HTTP/TCP stack, often without its optional DTLS encryption enabled. AdminKit's port check tool can confirm whether a device's CoAP port is reachable from the internet, where it is a known DDoS amplification target. ### Confused deputy problem (https://adminkit.net/glossary/confused-deputy-problem/) The confused deputy problem is a security flaw where a trusted program is tricked by a less-privileged caller into misusing its own authority on that caller's behalf -- a risk AdminKit's MCP server security guide covers for agent-tool gateways that forward a token without checking who it was actually issued for. ### Content-Security-Policy (CSP) (https://adminkit.net/glossary/content-security-policy/) Content-Security-Policy (CSP) is an HTTP response header, specified by the W3C, that lets a site allowlist which sources of scripts and other resources a browser may load, mitigating cross-site scripting. AdminKit's HTTP headers tool checks whether a site sends a Content-Security-Policy header, and what it actually allows. ### CSR (Certificate Signing Request) (https://adminkit.net/glossary/csr-certificate-signing-request/) A CSR (Certificate Signing Request) is the file a server operator sends a certificate authority to request a TLS certificate, structured under RFC 2986's PKCS #10 format and signed with the matching private key. AdminKit's SSL check tool shows the certificate a CSR eventually becomes, as a live server presents it. ### DANE/TLSA (https://adminkit.net/glossary/dane-tlsa/) DANE (DNS-Based Authentication of Named Entities) uses a DNSSEC-signed TLSA record to publish exactly which TLS certificate a server should present, so a client can detect a forged or substituted one. AdminKit's STARTTLS guide covers how DANE and MTA-STS protect the TLS a mail server actually enforces. ### DHCP (Dynamic Host Configuration Protocol) (https://adminkit.net/glossary/dhcp/) DHCP (Dynamic Host Configuration Protocol), defined in RFC 2131, is how a device joining a network automatically gets an IP address, subnet mask, gateway and DNS servers, without anyone typing them in by hand. AdminKit's subnet calculator works out the subnet math a DHCP server's address pool is carved from. ### DHCPv6 (https://adminkit.net/glossary/dhcpv6/) DHCPv6, defined in RFC 8415, is the IPv6 protocol a server uses to assign addresses and configuration options such as DNS servers to clients, either statefully (assigning the address itself) or statelessly alongside SLAAC. AdminKit's guide to IPv6 SLAAC and EUI-64 addressing explains the self-assignment alternative DHCPv6 is often paired or compared with. ### DKIM selector (https://adminkit.net/glossary/dkim-selector/) A DKIM selector is a short label in a message's DKIM-Signature header that tells a receiving server exactly which DNS TXT record holds the public key needed to verify it, letting one domain publish several keys at once. AdminKit's guide to DKIM selector mistakes covers the failures its DKIM check tool most often surfaces. ### DKIM (https://adminkit.net/glossary/dkim/) DKIM lets a sending domain cryptographically sign outgoing email with a private key, adding a header a receiver verifies against a public key published in DNS, confirming the message wasn't altered after signing. AdminKit's DKIM check tool checks a domain's DKIM record for the signing errors RFC 6376 compliance depends on. ### DMARC (https://adminkit.net/glossary/dmarc/) DMARC is a DNS TXT record that tells receiving mail servers what to do when a message fails SPF and DKIM -- monitor, quarantine or reject -- and reports results back to the domain owner. AdminKit's DMARC check tool shows a domain's current policy and whether its alignment is set up correctly. ### DMARC aggregate report (RUA) (https://adminkit.net/glossary/dmarc-aggregate-report-rua/) A DMARC aggregate report (RUA) is the periodic XML summary mail receivers send to the address a domain's DMARC record names in its rua tag, listing SPF and DKIM results for mail claiming that domain, broken down by sending source. AdminKit's guide to reading these reports covers the staged rollout decisions they're meant to inform. ### DNP3 (Distributed Network Protocol 3) (https://adminkit.net/glossary/dnp3/) DNP3 (Distributed Network Protocol 3), standardized as IEEE 1815, carries readings and control commands between a master station and field devices on electric, water and gas utility SCADA networks. AdminKit's Modbus/TCP check targets DNP3's sibling OT protocol, which shares the same often-disabled-authentication exposure on internet-facing industrial networks. ### DNS cookies (https://adminkit.net/glossary/dns-cookies/) DNS cookies, defined in RFC 7873, are an optional EDNS0 extension letting a resolver and authoritative server exchange a token proving a UDP reply isn't spoofed, without the overhead of a full TCP handshake. AdminKit's router DNS-hijack guide covers this as one signal behind detecting a tampered resolver. ### DNS forwarder (https://adminkit.net/glossary/dns-forwarder/) A DNS forwarder, defined in RFC 8499, is a nameserver that hands queries to another nameserver instead of walking the authoritative chain itself -- the common setup on home routers and small-office networks. AdminKit's DNS resolver test shows which upstream resolver a device's forwarder is actually sending queries to. ### DNS NOTIFY (https://adminkit.net/glossary/dns-notify/) DNS NOTIFY, defined in RFC 1996, lets a zone's primary nameserver immediately tell its secondaries the zone changed, instead of every secondary waiting out the SOA record's refresh timer to notice. AdminKit's zone-transfer guide explains what a secondary actually does once a NOTIFY message wakes it up. ### DNS propagation / TTL (https://adminkit.net/glossary/dns-propagation-ttl/) TTL is the number of seconds a DNS resolver is allowed to cache a record before checking again; "propagation" is the real-world delay before every resolver that cached an old answer has that cache expire and fetch the new one. AdminKit's DNS resolver test shows what a fresh resolver currently returns for a domain. ### DNS UPDATE (Dynamic DNS Update) (https://adminkit.net/glossary/dns-update/) DNS UPDATE lets an authorized client add, delete or change individual records in a zone directly, without editing and reloading a zone file, and is normally restricted with TSIG or SIG(0) authentication. AdminKit's DNS Lookup tool shows a record's current live value, the same value an authorized or unauthorized Update actually changes. ### DNS (https://adminkit.net/glossary/dns/) DNS (the Domain Name System) is the internet's directory service, translating domain names like adminkit.net into the numeric IP addresses computers use to route traffic, by walking a hierarchy of root, top-level-domain and authoritative nameservers. AdminKit's DNS lookup tool shows any domain's current records in one place. ### DNS64 (https://adminkit.net/glossary/dns64/) DNS64, defined in RFC 6147, lets an IPv6-only client reach an IPv4-only destination by synthesizing an IPv6 address from the destination's A record when no AAAA record exists, for a paired NAT64 translator to route. AdminKit's IPv6 guide covers how transition techniques like DNS64 change what a home network can reach. ### DNSKEY record (https://adminkit.net/glossary/dnskey-record/) A DNSKEY record, defined in RFC 4034, publishes the public key a zone uses to sign its own DNS records under DNSSEC, which a validating resolver fetches to verify the zone's RRSIG signatures. AdminKit's DNSSEC guide covers confirming a domain publishes the DS, DNSKEY and RRSIG records a resolver needs. ### DNSSEC (https://adminkit.net/glossary/dnssec/) DNSSEC adds cryptographic signatures to DNS records so a validating resolver can confirm a response really came from a domain's authoritative owner and was not forged or altered in transit. AdminKit's DNS Lookup tool shows a domain's DNSKEY, RRSIG and DS records that make up its DNSSEC chain. ### Docker Remote API (https://adminkit.net/glossary/docker-remote-api/) The Docker Remote API (also called the Docker Engine API) is the HTTP interface the Docker daemon exposes for creating and inspecting containers, carrying no authentication of its own unless TLS client certificates are configured. AdminKit's port-exposure guide shows how to check whether your own Docker Engine API is reachable from the internet without one. ### DNSBL (https://adminkit.net/glossary/dnsbl/) A DNSBL (DNS-based Blackhole List) is a blocklist of IP addresses observed sending spam or abuse, published in a format mail servers can query with ordinary DNS lookups before accepting a message. AdminKit's guide explains why an IP ends up on a blacklist like Spamhaus and how to get delisted. ### DoH (https://adminkit.net/glossary/doh/) DoH (DNS over HTTPS), defined in RFC 8484, sends DNS queries inside an encrypted HTTPS connection instead of plain UDP/TCP port 53, so an ISP or attacker on the network can't read or tamper with which domains are being looked up. AdminKit's DNS resolver test tool shows which resolver and protocol a connection is actually using. ### DoQ (DNS-over-QUIC) (https://adminkit.net/glossary/doq/) DoQ (DNS-over-QUIC), defined in RFC 9250, encrypts DNS queries using QUIC instead of TLS-over-TCP or HTTPS, avoiding the head-of-line blocking a single stalled connection can cause. AdminKit's DoH-vs-DoT guide compares DoQ's QUIC transport against those encrypted DNS alternatives and their privacy tradeoffs. ### DoT (https://adminkit.net/glossary/dot/) DoT (DNS over TLS) encrypts DNS queries and responses over a dedicated TLS connection, usually on port 853, keeping DNS traffic separate from ordinary HTTPS traffic rather than blending into it like DoH does. AdminKit's DNS Resolver Test checks how your connection's resolver actually behaves. ### DS record (https://adminkit.net/glossary/ds-record/) A DS (Delegation Signer) record is a DNSSEC record a parent zone publishes holding a hash of a child zone's signing key, letting a resolver confirm the delegation is genuine. Defined in RFC 4034 and RFC 4035, it links a chain of trust from the DNS root down. AdminKit's DNS lookup tool shows a domain's DNSSEC chain, DS record included. ### DSN (Delivery Status Notification) (https://adminkit.net/glossary/dsn-delivery-status-notification/) A DSN (Delivery Status Notification) is the standardized report a mail server sends when it can't deliver a message, defined by RFC 3461 and RFC 3464. Its status code and failing recipient are machine-readable, separate from the bounce text a person reads. AdminKit's bounce-and-backscatter guide explains how a forged sender turns DSNs into a backscatter flood. ### DS-Lite (Dual-Stack Lite) (https://adminkit.net/glossary/dual-stack-lite/) Dual-Stack Lite (DS-Lite), defined in RFC 6333, lets an ISP run an IPv6-only access network while customers still reach the IPv4 internet, tunneling their traffic to a shared carrier-side NAT (AFTR) over IPv6. AdminKit's CGNAT guide compares this with ordinary carrier-grade NAT, which shares addresses without removing IPv4 from the access network. ### Dynamic IP (https://adminkit.net/glossary/dynamic-ip/) A dynamic IP is a public address an ISP assigns temporarily and can change over time, for example when a DHCP lease expires, unlike a static IP which stays fixed and usually costs extra. AdminKit's My IP tool checks the public address your connection has right now. ### Dual-stack (https://adminkit.net/glossary/dual-stack/) Dual-stack is a network configuration where a device or network runs IPv4 and IPv6 at the same time, each needing its own security configuration, as defined in RFC 4213. AdminKit's DNS lookup tool resolves both a domain's A (IPv4) and AAAA (IPv6, RFC 3596) records side by side for a dual-stack audit. ### Encrypted ClientHello (ECH) (https://adminkit.net/glossary/ech-encrypted-client-hello/) Encrypted ClientHello (ECH), defined in the IETF TLS working group's draft-ietf-tls-esni and built on TLS 1.3 (RFC 8446), encrypts the ClientHello so a network observer can no longer read the plaintext Server Name Indication. AdminKit's SSL/TLS check reports the handshake details a connection actually negotiates, including whether SNI is visible or ECH-protected. ### EDNS Client Subnet (ECS) (https://adminkit.net/glossary/edns-client-subnet-ecs/) EDNS Client Subnet (ECS), an EDNS0 option defined in RFC 7871, lets a recursive resolver forward part of a querying client's IP address to an authoritative server so it can return a geographically closer answer. AdminKit's guide to resolver-dependent DNS answers covers ECS as one of the ordinary, non-broken reasons a domain resolves differently. ### EDNS(0) Padding (https://adminkit.net/glossary/edns0-padding/) EDNS(0) Padding, defined in RFC 7830, adds extra bytes to a DNS message so its size alone doesn't reveal which query it carries, closing a side channel encryption leaves open over DoH, DoT or DoQ. AdminKit's DoH-vs-DoT guide covers the encrypted transports padding is meant to be used alongside. ### EDNS0 (Extension Mechanism for DNS) (https://adminkit.net/glossary/edns0/) EDNS0 (RFC 6891) extends DNS with an optional OPT record so resolvers can signal larger payload sizes and other capabilities the original 1987 protocol never anticipated, including DNS Cookies (RFC 7873) and padding. AdminKit's DNS lookup tool sends EDNS0-aware queries so it can retrieve full DNSSEC and large-answer responses correctly. ### Elasticsearch HTTP API (https://adminkit.net/glossary/elasticsearch-http-api/) Elasticsearch exposes its search and cluster-administration functions through a JSON-over-HTTP API, by default on port 9200, Elastic's own documented default rather than an IANA-assigned port. Versions before 8.0 shipped with security disabled unless configured, which is why AdminKit's guide checks whether your own port 9200 is reachable without authentication. ### Envelope sender vs header From (https://adminkit.net/glossary/envelope-sender-vs-header-from/) An email carries two separate addresses: the envelope sender, used only for routing and bounces (RFC 5321), and the header From address a mail client actually displays (RFC 5322). SPF checks only the envelope sender, which is why a message can pass SPF while showing a forged header From. AdminKit's backscatter guide explains why this gap matters. ### EUI-64 (https://adminkit.net/glossary/eui-64/) EUI-64 derives a 64-bit IPv6 interface identifier from a device's 48-bit MAC address, a format RFC 4291 defines for Stateless Address Autoconfiguration. Because the result embeds a constant, trackable hardware identifier, modern systems now prefer randomized addresses (RFC 4941) instead. AdminKit's guide explains why every IPv6 device still needs its own firewall rules. ### Extended DNS Error (EDE) (https://adminkit.net/glossary/extended-dns-error-ede/) Extended DNS Error (EDE), an EDNS0 option defined in RFC 8914, lets a DNS server attach a machine-readable code explaining why it answered the way it did, instead of a bare SERVFAIL or NXDOMAIN. AdminKit's DNS lookup tool shows the answers an EDE code would explain, turning an opaque failure into a reason an administrator can act on. ### FQDN (https://adminkit.net/glossary/fqdn/) A fully qualified domain name (FQDN) specifies a host's exact position in the DNS hierarchy, from the host down to the root, per the naming rules RFC 1035 defines. Resolution reads each label right to left starting at the DNS root servers. AdminKit's DNS lookup tool validates the FQDN you enter before forwarding the query to its upstream resolver. ### Forward-confirmed reverse DNS (https://adminkit.net/glossary/forward-confirmed-reverse-dns/) Forward-confirmed reverse DNS (FCrDNS) checks that a sending IP's PTR hostname resolves forward back to the same IP, a basic anti-spoofing signal receiving mail servers use before accepting mail. RFC 1912 flags a PTR/A mismatch as a common DNS error FCrDNS catches. AdminKit's reverse DNS and DNS lookup tools together let you run both halves of the check manually. ### FTP (File Transfer Protocol) (https://adminkit.net/glossary/ftp/) FTP (RFC 959) is a decades-old protocol for transferring files between a client and server, typically on port 21, whose USER and PASS commands send a login's username and password as plain, unencrypted text. AdminKit's guide checks whether a device's FTP port is actually reachable from the public internet. ### Glue record (https://adminkit.net/glossary/glue-record/) A glue record is an A or AAAA record a parent zone publishes alongside an NS delegation, giving a nameserver's IP address directly and avoiding the circular lookup an in-domain nameserver would otherwise need. RFC 7719 formally defines the term. AdminKit's DNS lookup tool helps spot a missing or mismatched glue record at the registrar. ### Greylisting (https://adminkit.net/glossary/greylisting/) Greylisting is a spam-reduction technique where a mail server temporarily rejects an unfamiliar sender with an SMTP 4xx code, then accepts the message once it retries, relying on RFC 5321's retry requirement. Spam infrastructure of the era often never retried. AdminKit's MX lookup tool shows which mail server handles a domain's inbound mail so a greylisting setup can be reviewed. ### Happy Eyeballs (https://adminkit.net/glossary/happy-eyeballs/) Happy Eyeballs, specified in RFC 8305 (updating the original RFC 6555), is an algorithm a dual-stack client uses to race IPv6 and IPv4 connection attempts, keeping whichever completes first rather than waiting for a broken path to time out. AdminKit's DNS lookup resolves both the A and AAAA records that race runs over. ### Honeypot (https://adminkit.net/glossary/honeypot/) A honeypot is a deliberately exposed decoy system set up to attract scanning and attack traffic so defenders can observe attacker behavior without risking any real system or data. AdminKit's protective DNS product uses this kind of sensor data, gathered by honeypot and sensor networks, to inform its blocklists. ### HSTS preload list (https://adminkit.net/glossary/hsts-preload-list/) The HSTS preload list is a hardcoded browser list, maintained via hstspreload.org, that forces HTTPS from a domain's very first connection, closing a bootstrap gap in RFC 6797's HSTS header. Ordinary HSTS only protects a domain after a browser's first successful HTTPS visit. AdminKit's guide explains why preloading isn't recommended for every site. ### HTTP/3 (https://adminkit.net/glossary/http3/) HTTP/3, defined in RFC 9114, is the first HTTP version to run over QUIC (RFC 9000) instead of TCP, so one lost packet only delays its own stream rather than stalling every multiplexed request. AdminKit's TLS certificate chain check validates the same chain concept that carries into the QUIC connection HTTP/3 runs on. ### IP address (https://adminkit.net/glossary/ip-address/) An IP address is the numeric identifier, IPv4 (RFC 791) or IPv6 (RFC 8200), that lets devices find and route traffic to each other, with IPv4's roughly 4.3 billion addresses long since exhausted. AdminKit's IP lookup shows exactly what the internet sees from your connection right now, IPv4, IPv6, or both. ### IPv4 address exhaustion (https://adminkit.net/glossary/ipv4-address-exhaustion/) IPv4 address exhaustion is the depletion of IPv4's roughly 4.3 billion addresses, reached when IANA allocated its last free blocks to the regional registries in 2011. ISPs responded with Carrier-Grade NAT, sharing addresses from the RFC 6598 reserved block instead of moving networks to IPv6-only. AdminKit's CGNAT guide covers the shared-blacklist tradeoff that mitigation causes. ### IPv6 Privacy Extensions (Temporary Address) (https://adminkit.net/glossary/ipv6-privacy-extensions/) IPv6 Privacy Extensions generate a randomized, temporary interface identifier instead of one derived from a device's MAC address, so the same device looks different on every network and over time. AdminKit's guide on MAC address randomization explains why this replaces the older EUI-64 approach for most traffic today. ### IPv6 prefix delegation (https://adminkit.net/glossary/ipv6-prefix-delegation/) IPv6 prefix delegation, a DHCPv6 option defined in RFC 8415 (replacing the earlier RFC 3633), lets an ISP hand a router a short prefix -- commonly a /56 or /60 -- to subnet into /64s for its own LANs. AdminKit's SLAAC guide explains how a device turns that delegated /64 into a full address. ### IPv6 (https://adminkit.net/glossary/ipv6/) IPv6 is the successor to IPv4, using 128-bit addresses so every device can get its own globally routable address without NAT or CGNAT. Many networks still run IPv4-only firewall rules that never account for a device's IPv6 address, which AdminKit's subnet calculator and DNS lookup tools can help check alongside a device's IPv4 configuration. ### IXFR (Incremental Zone Transfer) (https://adminkit.net/glossary/ixfr-incremental-zone-transfer/) IXFR, defined in RFC 1995, lets a secondary nameserver pull only the records that changed since its last transfer, instead of re-pulling the whole zone the way AXFR does. DNS NOTIFY (RFC 1996) is what normally prompts that check. AdminKit's zone-transfer guide covers the full AXFR transfer IXFR is a smaller, cheaper alternative to. ### JSON-RPC (https://adminkit.net/glossary/json-rpc/) JSON-RPC is a lightweight remote-procedure-call format, specified at jsonrpc.org, that encodes a method, parameters and an ID as JSON. Version 2.0 is the wire format the Model Context Protocol requires for every client-server message. AdminKit's MCP endpoint check probes a server's initialize and tools/list JSON-RPC calls directly. ### JWKS (JSON Web Key Set) (https://adminkit.net/glossary/jwks-json-web-key-set/) A JWKS (JSON Web Key Set) is a JSON object publishing an authorization server's current public keys, each one a JSON Web Key, so a resource server can verify a JWT's signature without a hardcoded key. AdminKit's planned MCP gateway is designed to validate OAuth tokens against a server's JWKS the same way. ### JWT (JSON Web Token) (https://adminkit.net/glossary/jwt-json-web-token/) A JWT (JSON Web Token) is a compact, signed string of claims -- who issued it, who it's for, when it expires -- used as an OAuth 2.0 bearer token so a resource server can verify a request's sender without calling the issuer. AdminKit's guide to the MCP confused deputy problem covers why checking a JWT's audience claim matters. ### LDAP (https://adminkit.net/glossary/ldap/) LDAP (Lightweight Directory Access Protocol, RFC 4511) queries directory services like Active Directory for user accounts and authentication data. Plain LDAP on port 389 sends bind credentials without encryption unless upgraded with STARTTLS or run over LDAPS (port 636), so AdminKit's port check tool can confirm a directory service isn't directly reachable from the open internet. ### Link-local address (https://adminkit.net/glossary/link-local-address/) A link-local address is an IP address that only works on its own local network segment and is never routed anywhere else -- IPv6 assigns one automatically in fe80::/10, while IPv4 falls back to 169.254.0.0/16 via APIPA when DHCP fails. AdminKit's guide to IPv6 SLAAC and EUI-64 addressing covers how these get generated and used. ### List-Unsubscribe header (https://adminkit.net/glossary/list-unsubscribe-header/) The List-Unsubscribe header is an email header that lets a sender publish a mailto or HTTPS link so a mail client can unsubscribe a recipient without them opening the message, with RFC 8058 adding a one-click POST option. AdminKit's blacklist check reports the reputation damage -- like spam complaints -- that skipping it tends to cause. ### Loopback address (https://adminkit.net/glossary/loopback-address/) A loopback address is the reserved address a device uses to talk to itself -- 127.0.0.1 for IPv4, ::1 for IPv6 -- handled entirely inside its own network stack and never sent over a physical interface. AdminKit's guide to checking for an exposed Redis instance explains why services default to listening there instead of a public interface. ### MAC OUI (https://adminkit.net/glossary/mac-oui/) A MAC OUI (Organizationally Unique Identifier) is the first three bytes of a network interface's MAC address, assigned by IEEE to the manufacturer that requested it, which is why looking it up often reveals a device's maker. AdminKit's MAC vendor lookup tool resolves that OUI prefix to its registered manufacturer for exactly this reason. ### Cancellation (MCP) (https://adminkit.net/glossary/mcp-cancellation/) Cancellation is how either side of a Model Context Protocol connection asks the other to stop an in-progress request, sending a notifications/cancelled message that names the request's ID and an optional reason. AdminKit's security gateway for MCP servers logs these notifications, alongside progress updates, as they pass through a long-running call. ### Completion (MCP) (https://adminkit.net/glossary/mcp-completion/) Completion is a Model Context Protocol request, completion/complete, that lets a server offer IDE-like argument autocompletion for a prompt or a resource template's URI, returning up to 100 ranked suggestions per response. AdminKit's MCP gateway sits in the request path every call, including completion requests, passes through on its way to a server. ### Elicitation (MCP) (https://adminkit.net/glossary/mcp-elicitation/) Elicitation is a Model Context Protocol capability letting a server pause mid-task and ask the client to collect more information from the user, rather than requesting everything a tool needs up front. AdminKit's guide to securing an MCP server covers why elicitation requests need the same explicit user review as a tool call. ### MCP logging (https://adminkit.net/glossary/mcp-logging/) MCP logging is a Model Context Protocol capability letting a server send structured, leveled log messages to the client that connects it to an AI agent, for debugging and visibility rather than for the agent's own reasoning. AdminKit's MCP & Agent Gateway plans its own operator-facing audit log alongside this client-facing one. ### Progress notification (MCP) (https://adminkit.net/glossary/mcp-progress-notification/) A progress notification is how the Model Context Protocol reports incremental status on a long-running request, sent as an optional notifications/progress message tied to a progressToken the client attached to its original request. AdminKit's MCP gateway sits in the request path where these notifications, along with the calls they describe, pass through. ### MCP Registry (https://adminkit.net/glossary/mcp-registry/) The MCP Registry is the official, centralized metadata directory at registry.modelcontextprotocol.io for publicly accessible MCP servers, verifying who published each one through namespace authentication rather than scanning what the server's code actually does. AdminKit's guide to securing an MCP server covers why a server's listing there is not, by itself, a safety signal worth trusting. ### Prompt (MCP) (https://adminkit.net/glossary/mcp-prompt/) A prompt, in the Model Context Protocol, is a predefined, parameterized template a server exposes for a client to surface to its user -- as a slash command, say -- distinct from a model-invoked tool or a data resource. AdminKit's MCP endpoint check surfaces a server's exposed primitives for review, prompts included. ### Resource template (MCP) (https://adminkit.net/glossary/mcp-resource-template/) A resource template is how a Model Context Protocol server exposes a parameterized family of resources, such as file:///{path} for every file in a directory, as one RFC 6570 URI template rather than listing each resource individually. AdminKit's guide to securing an MCP server covers why an exposed resource list, templates included, needs the same scoping as tools. ### Resource (MCP) (https://adminkit.net/glossary/mcp-resource/) A resource, in the Model Context Protocol, is a piece of data -- a file, a database record, an API response -- a server exposes to a client by URI, distinct from a tool, which performs an action instead of returning data. AdminKit's guide to securing an MCP server covers why resources need the same scoping review as tools. ### Roots (MCP) (https://adminkit.net/glossary/mcp-roots/) Roots are a Model Context Protocol mechanism for a client to tell a server which filesystem directories it may operate within, advertised as one or more URIs the server is expected to honor voluntarily rather than an enforced sandbox. AdminKit's planned MCP gateway is built around the same scoped-access idea roots apply to a filesystem. ### Sampling (MCP) (https://adminkit.net/glossary/mcp-sampling/) Sampling is a Model Context Protocol primitive letting a server ask the client to run a completion against the client's own LLM rather than needing its own model access, gated on the user explicitly reviewing and approving both the prompt and the result. AdminKit's guide to securing an MCP server covers that same consent requirement. ### Structured content (MCP) (https://adminkit.net/glossary/mcp-structured-content/) Structured content is the optional structuredContent field a Model Context Protocol tool result can return alongside its usual content array, carrying the result as a plain JSON object validated against the tool's declared outputSchema instead of text a client has to parse. AdminKit's guide to securing an MCP server covers why that output still needs validation, not blind trust. ### Tool annotations (MCP) (https://adminkit.net/glossary/mcp-tool-annotations/) Tool annotations are optional Model Context Protocol metadata, like readOnlyHint and destructiveHint, that describe a tool's expected effects so a client can decide how much friction to apply before a call runs -- hints the specification treats as untrusted, not a security boundary. AdminKit's MCP endpoint check infers a similar severity signal from each tool's own description. ### Tool poisoning (https://adminkit.net/glossary/mcp-tool-poisoning/) Tool poisoning is an attack on AI agents using the Model Context Protocol (MCP), where a tool's description is crafted to manipulate the agent reading it rather than exploiting the tool's actual function, since the agent trusts that description as context. AdminKit's MCP check tool inspects a server's tool definitions for this kind of hidden-instruction manipulation. ### Transport security (MCP) (https://adminkit.net/glossary/mcp-transport-security/) MCP transport security is the set of protections the Model Context Protocol specification requires per transport: the OS process boundary and environment credentials for stdio, and Origin validation against DNS rebinding plus authentication for Streamable HTTP. AdminKit's guide to securing an MCP server covers why HTTP-based transports need auth that stdio can skip. ### MCP (Model Context Protocol) (https://adminkit.net/glossary/mcp/) MCP (Model Context Protocol) is an open standard defining how AI agents and assistants connect to external tools, data sources and services through one shared interface, instead of a custom connector for every integration. AdminKit's MCP gateway sits between an agent and the MCP servers it calls, applying the protocol's own security guidance to that traffic. ### mDNS (https://adminkit.net/glossary/mdns/) mDNS (Multicast DNS) lets devices on a local network resolve each other's .local names without a central DNS server, which is how Bonjour, AirPrint and many smart-home devices find printers and speakers nearby. AdminKit's guide explains why local-network discovery protocols like mDNS still need a firewall at the edge. ### Modbus/TCP (https://adminkit.net/glossary/modbus-tcp/) Modbus/TCP is the TCP/IP version of a decades-old industrial protocol used to read and write values on programmable logic controllers, typically over port 502, with no authentication, authorization or encryption built in. AdminKit's guide explains how to check whether a Modbus/TCP device is exposed to the internet. ### Context window (https://adminkit.net/glossary/model-context-window/) A model's context window is the maximum number of tokens -- prompt, instructions, tool output and the model's own reply -- it can process in one request, a limit each vendor sets for its own models. AdminKit's guide to securing an MCP server treats anything an agent reads into that window, including tool output, as untrusted by default. ### MongoDB wire protocol (https://adminkit.net/glossary/mongodb-wire-protocol/) The MongoDB wire protocol is the TCP message format MongoDB's own drivers and mongosh use to talk to a mongod or mongos process, normally on port 27017, documented in MongoDB's own manual rather than an independent spec. AdminKit's guide to checking an exposed MongoDB port explains why an internet-reachable 27017 usually means a deliberately widened bind address. ### MQTT (https://adminkit.net/glossary/mqtt/) MQTT (Message Queuing Telemetry Transport) is a lightweight publish/subscribe messaging protocol built for constrained devices and unreliable networks, which is why it became the default choice for a huge range of IoT products. AdminKit's guide to checking an open MQTT broker explains why its default port, 1883, so often ships with no authentication at all. ### MTA-STS (https://adminkit.net/glossary/mta-sts/) MTA-STS lets a domain publish a policy, via a DNS record plus an HTTPS-hosted file, requiring that incoming mail be delivered only over TLS with a valid, matching certificate, closing a gap where an attacker could force an unencrypted downgrade unnoticed. AdminKit's guide explains how it fits alongside SPF, DKIM and DMARC. ### Path MTU Discovery (PMTUD) (https://adminkit.net/glossary/mtu-path-mtu-discovery/) Path MTU Discovery (PMTUD) is how a sender finds the largest packet a route's links can carry without fragmenting it, retrying smaller after a router reports its own limit back over ICMP. AdminKit's TLS/SSL check helps tell a stalled handshake caused by a blocked PMTUD message apart from a real certificate problem. ### IP multicast (https://adminkit.net/glossary/multicast/) IP multicast is a way of sending one packet to every member of an interested group at once, instead of broadcasting to a whole network or sending a separate unicast copy to each recipient. AdminKit's guide to mDNS, SSDP and UPnP LAN discovery covers how those zero-configuration protocols build on multicast to find other devices. ### Multipath TCP (MPTCP) (https://adminkit.net/glossary/multipath-tcp/) Multipath TCP (MPTCP) extends ordinary TCP so a single connection can use more than one network path at once, such as a phone's WiFi and cellular radios together, instead of staying tied to one address pair for its whole lifetime. AdminKit's My IP tool shows the single address a check sees, even when a connection itself is spread across several. ### Mutual TLS (mTLS) (https://adminkit.net/glossary/mutual-tls/) Mutual TLS (mTLS) is a TLS handshake where the server also requests and verifies a certificate from the client, authenticating both sides instead of only the server a normal HTTPS connection authenticates. AdminKit's guide to securing an MQTT broker covers when issuing a certificate per device is worth the operational cost over username and password alone. ### MX record (https://adminkit.net/glossary/mx-record/) An MX record is a DNS entry that tells other mail servers which server is responsible for receiving email on behalf of a domain, ordered by a priority value so backups can be listed. AdminKit's MX Lookup tool looks up a domain's MX records directly, in priority order. ### MySQL wire protocol (https://adminkit.net/glossary/mysql-wire-protocol/) The MySQL wire protocol is the TCP message format MySQL's own client libraries use to connect, authenticate and exchange queries with a mysqld server, normally on port 3306. AdminKit's guide to checking an exposed MySQL port explains why a reachable 3306 has been a documented ransomware target since 2017. ### NAT (https://adminkit.net/glossary/nat/) NAT (Network Address Translation) is how a router lets many devices on a private network share one public IP address, rewriting the address and port on each packet in both directions. AdminKit's CGNAT guide explains the second layer some ISPs add on top, sharing one public address across multiple customers' routers. ### NAT loopback (https://adminkit.net/glossary/nat-loopback/) NAT loopback (NAT hairpinning) is a router feature that lets a device on a local network reach another local device using its public IP address or domain name, instead of its internal one. Not every consumer router supports it, which AdminKit's My IP tool can help confirm by showing whether your public address even resolves back to your own network. ### NAT64 (https://adminkit.net/glossary/nat64/) NAT64, defined in RFC 6146, is a stateful mechanism that lets an IPv6-only client reach an IPv4-only server by translating packets at a network boundary, usually paired with DNS64 for address synthesis. AdminKit's CGNAT guide compares NAT64 with the IPv4-side address-sharing technique it's often confused with. ### Negative caching (https://adminkit.net/glossary/negative-caching/) Negative caching lets a resolver remember that a DNS query returned no answer -- NXDOMAIN or an empty NOERROR -- for a TTL set by the zone's SOA record, per RFC 2308. AdminKit's TTL guide explains how that same SOA minimum controls DNS propagation delay. ### NDP (Neighbor Discovery Protocol) (https://adminkit.net/glossary/neighbor-discovery-protocol/) Neighbor Discovery Protocol (NDP), defined in RFC 4861, is IPv6's replacement for ARP, ICMP router discovery and ICMP redirects, using ICMPv6 messages for address resolution and autoconfiguration. AdminKit's SLAAC guide covers how the same Neighbor Discovery messages build a host's autoconfigured IPv6 address. ### NS record (https://adminkit.net/glossary/ns-record/) An NS record identifies which servers are authoritative for a domain, holding its actual DNS records and answering queries about it, as distinct from servers that merely cache or forward answers. AdminKit's DNS Lookup tool looks up a domain's NS records to confirm they match at the registrar and in the zone. ### NSEC3 record (https://adminkit.net/glossary/nsec3-record/) NSEC3, defined in RFC 5155, is a DNSSEC record that proves a DNS name doesn't exist using a salted hash of the zone's real owner names, closing the zone-enumeration gap the original NSEC record left open. AdminKit's DNSSEC guide covers where this authenticated denial fits in the signature chain. ### NTP (Network Time Protocol) (https://adminkit.net/glossary/ntp-network-time-protocol/) NTP (Network Time Protocol), defined in RFC 5905, synchronizes a device's clock against a hierarchy of time servers -- accuracy that DNSSEC quietly depends on, since RRSIG signatures expire on a wall-clock timestamp. AdminKit's glossary covers RRSIG, the DNSSEC record an inaccurate NTP clock can break. ### NSEC record (https://adminkit.net/glossary/nsec-record/) NSEC, defined in RFC 4034 and RFC 4035, is the original DNSSEC record that proves a DNS name genuinely doesn't exist by naming the next real owner name in the zone -- which also lets anyone walk the chain and enumerate it. AdminKit's DNSSEC guide covers the signature chain NSEC plugs into. ### Null MX record (https://adminkit.net/glossary/null-mx-record/) A null MX record, standardized in RFC 7505, is a single MX record pointing to the root domain that tells senders a domain explicitly accepts no email at all, instead of leaving mail handling undefined. AdminKit's MX lookup tool reports a null MX explicitly, rather than as a missing or broken record. ### NXDOMAIN (https://adminkit.net/glossary/nxdomain/) NXDOMAIN is the DNS response code, defined in RFC 1035, a server returns when a queried domain doesn't exist at all, distinct from an empty NOERROR answer meaning the name exists but lacks that record type. AdminKit's negative caching entry explains how resolvers cache an NXDOMAIN answer using the zone's SOA minimum TTL. ### OAuth 2.0 Authorization Server Metadata (https://adminkit.net/glossary/oauth-authorization-server-metadata/) OAuth 2.0 Authorization Server Metadata, defined in RFC 8414, is a JSON document an authorization server publishes at a well-known path so a client can learn its endpoints and supported features from the issuer URL alone. AdminKit's MCP server hardening checklist requires publishing this metadata for exactly that reason. ### OAuth 2.0 Dynamic Client Registration (https://adminkit.net/glossary/oauth-dynamic-client-registration/) OAuth 2.0 Dynamic Client Registration, defined in RFC 7591, lets a client obtain its own client ID by posting metadata to an authorization server, instead of a developer provisioning credentials manually in advance. AdminKit's MCP server hardening checklist requires supporting it, since general-purpose clients meet unfamiliar servers constantly. ### OAuth for MCP (https://adminkit.net/glossary/oauth-for-mcp/) The Model Context Protocol's authorization specification defines how an MCP client authenticates to a server using OAuth 2.1, rather than an ad hoc scheme, and explicitly warns against naive token passthrough between services. AdminKit's planned MCP gateway is built to enforce OAuth per this specification. ### OAuth 2.0 Protected Resource Metadata (https://adminkit.net/glossary/oauth-protected-resource-metadata/) OAuth 2.0 Protected Resource Metadata, defined in RFC 9728, lets a resource server such as an MCP server publish which authorization server issues valid tokens for it, discoverable from a 401 response alone. AdminKit's MCP server hardening checklist requires publishing it so unfamiliar clients can connect. ### OCSP stapling (https://adminkit.net/glossary/ocsp-stapling/) OCSP stapling lets a server prove its TLS certificate hasn't been revoked by attaching a signed, time-stamped response to the handshake itself, so the client doesn't have to query the certificate authority separately. AdminKit's SSL/TLS check shows a server's certificate and negotiated protocol, including whether stapling is enabled. ### Oblivious DoH (ODoH) (https://adminkit.net/glossary/oblivious-doh-odoh/) Oblivious DoH (ODoH), defined in RFC 9230, adds a proxy between a DNS client and a DoH resolver (RFC 8484) so the resolver sees an encrypted query but not the client's IP address, and the proxy sees the client's IP but not the query. AdminKit's guide to DoH vs. DoT privacy tradeoffs covers where ODoH fits. ### OPC UA (https://adminkit.net/glossary/opc-ua/) OPC UA, defined in the IEC 62541 series, is an industrial protocol for PLCs, SCADA and sensors with authentication and encryption built in as configurable options -- unlike older protocols such as Modbus or BACnet. AdminKit's planned OT remote access tunnel is built to reach OPC UA devices alongside those older protocols. ### Open relay (https://adminkit.net/glossary/open-relay/) An open relay is a mail server that accepts and forwards email from any sender to any recipient without verifying the sender is authorized, which spammers scan for and abuse until the server's IP lands on a blacklist. AdminKit's blacklist check tool shows whether an IP is listed on major blocklists. ### PEM format (https://adminkit.net/glossary/pem-format-privacy-enhanced-mail/) PEM (Privacy-Enhanced Mail) format is the base64 text container -- BEGIN/END headers -- that most TLS certificates and keys are stored in, standardized for that reuse by RFC 7468. AdminKit's SSL check tool reads the certificate chain a server presents, typically distributed to it in PEM form. ### PKCE (Proof Key for Code Exchange) (https://adminkit.net/glossary/pkce/) PKCE (Proof Key for Code Exchange), defined in RFC 7636, stops a stolen OAuth authorization code from being redeemed by anyone but the client that requested it -- mandatory for every client in OAuth 2.1. AdminKit's MCP server hardening checklist covers implementing the OAuth 2.1 flow PKCE belongs to. ### PCP (Port Control Protocol) (https://adminkit.net/glossary/port-control-protocol/) PCP (Port Control Protocol), defined in RFC 6887, lets a device ask a NAT gateway or firewall to open an inbound port mapping, working across carrier-grade NAT like CGNAT where UPnP alone can't reach. AdminKit's port check tool verifies whether a mapping -- via PCP, UPnP, or manual forwarding -- is actually reachable. ### Open DNS resolver (https://adminkit.net/glossary/open-resolver/) An open DNS resolver answers recursive queries from any client on the internet rather than only its intended users, letting an attacker spoof a victim's address and trigger a flood of replies far larger than the request -- a DNS amplification attack. AdminKit's resolver test names the resolver actually answering a device's queries. ### Port forwarding (https://adminkit.net/glossary/port-forwarding/) Port forwarding is a router rule that takes inbound traffic on a specific public port and forwards it to a chosen device and port on the local network, which is how a self-hosted service can accept connections from the internet. AdminKit's port check tool confirms whether a forwarded port is actually open and reachable from outside. ### PostgreSQL wire protocol (https://adminkit.net/glossary/postgresql-wire-protocol/) The PostgreSQL wire protocol is the message format a client uses to connect, authenticate and query over TCP, normally on port 5432, documented as PostgreSQL's own frontend/backend protocol. AdminKit's guide checks whether your own PostgreSQL port 5432 is reachable from the internet, since the default binds only to localhost. ### Prompt injection (https://adminkit.net/glossary/prompt-injection/) Prompt injection is an attack where text an AI agent reads -- a web page, a document, a tool's response -- contains instructions crafted to make the agent act against the user's intent, since models don't reliably separate trusted instructions from untrusted content. AdminKit's guide covers a related MCP confused-deputy risk. ### PTR record (https://adminkit.net/glossary/ptr-record/) A PTR record is the reverse of an ordinary DNS lookup: it resolves an IP address back to a hostname, stored under the special in-addr.arpa or ip6.arpa zones. AdminKit's Reverse DNS tool looks up a PTR record directly, which mail servers also check before accepting a connection. ### PKI (public key infrastructure) (https://adminkit.net/glossary/public-key-infrastructure-pki/) Public key infrastructure (PKI), profiled for internet use in RFC 5280, is the system of certificate authorities, certificates and trust chains that lets a client verify a server's identity without ever sharing a secret in advance. AdminKit's SSL check tool verifies whether a site's certificate chains up to a trusted root, PKI's core guarantee. ### Punycode (internationalized domain names) (https://adminkit.net/glossary/punycode-idn/) Punycode, defined in RFC 3492, is the ASCII encoding that lets internationalized domain names with non-ASCII characters work inside the DNS, converting a label like café.example into xn--caf-dma.example under the hood. AdminKit's WHOIS tool resolves both the Unicode and xn-- forms of a domain when looking up registration data. ### QNAME minimization (https://adminkit.net/glossary/qname-minimization/) QNAME minimization, specified in RFC 7816 and its 2021 update RFC 9156, limits how much of a query name a recursive resolver reveals to each server it asks, instead of sending the full domain name to the root and TLD servers too. AdminKit's DNS privacy guide weighs this resolver-side technique alongside DoH and DoT. ### QUIC (https://adminkit.net/glossary/quic/) QUIC, defined in RFC 9000, is a transport protocol that runs over UDP and builds the TLS 1.3 handshake into connection setup, avoiding the head-of-line blocking TCP-based HTTP/2 can't escape. AdminKit's TLS check guide explains the handshake version your tool reports, over TCP, distinct from the one QUIC carries over UDP. ### RDAP (https://adminkit.net/glossary/rdap/) RDAP (Registration Data Access Protocol) is the IETF-standardized successor to WHOIS, returning who registered a domain or IP address block as structured JSON over HTTPS instead of WHOIS's loosely defined plain text. AdminKit's Whois tool looks up domain and IP registration data using the registries' current services. ### RDP Network Level Authentication (NLA) (https://adminkit.net/glossary/rdp-network-level-authentication/) Network Level Authentication (NLA) makes an RDP client authenticate before Windows creates a full remote-desktop session, instead of presenting the login screen to any connection first. AdminKit's RDP hardening guide lists NLA as the first control to enable beyond simply closing port 3389 to the internet. ### RDP (Remote Desktop Protocol) (https://adminkit.net/glossary/rdp/) RDP (Remote Desktop Protocol) is Microsoft's protocol, specified in MS-RDPBCGR, for remotely controlling a Windows desktop over the network, typically on port 3389 -- one of the internet's most consistently attacked exposed ports. AdminKit's guide checks whether RDP is reachable from the public internet on a given host. ### Recursive resolver (https://adminkit.net/glossary/recursive-resolver/) A recursive resolver is the DNS server a client actually asks, tracking an answer down through the root, TLD and authoritative servers on the client's behalf, then caching it -- the behavior RFC 1034 and RFC 1035 define. AdminKit's resolver test tool shows which recursive resolver a connection is actually using. ### Referrer-Policy (https://adminkit.net/glossary/referrer-policy/) Referrer-Policy is an HTTP header, specified by the W3C, that controls how much of a page's URL browsers send cross-origin in the Referer header when loading a resource or following a link elsewhere. AdminKit's HTTP security headers guide explains what each header result means, Referrer-Policy included. ### Regional Internet Registry (RIR) (https://adminkit.net/glossary/regional-internet-registry/) A Regional Internet Registry (RIR) is one of five nonprofit bodies -- AfriNIC, APNIC, ARIN, LACNIC, and RIPE NCC -- that IANA delegates to allocate IP address blocks and AS numbers within a region, under RFC 7020. AdminKit's WHOIS tool looks up which RIR's registration data a given address or ASN actually belongs to. ### Redis protected mode (https://adminkit.net/glossary/redis-protected-mode/) Redis protected mode, a default Redis has shipped since version 3.2.0, restricts an unauthenticated instance with no bind address set to loopback-only connections, per Redis's own security documentation. AdminKit's guide explains why Redis ships without a password by default, and what protected mode does and doesn't cover. ### RESP (Redis Serialization Protocol) (https://adminkit.net/glossary/resp-redis-protocol/) RESP (REdis Serialization Protocol) is the simple, text-based wire protocol Redis clients and servers exchange commands and replies over, typically port 6379, with no authentication built into the protocol itself. AdminKit's guide to checking an exposed Redis port explains why an internet-reachable RESP connection with no password is immediately exploitable. ### Reverse proxy (https://adminkit.net/glossary/reverse-proxy/) A reverse proxy is a server that sits in front of one or more backend servers and forwards client requests to them, so clients only ever see the proxy's own address. AdminKit's HTTP Headers tool inspects response headers like X-Forwarded-For and Via that often reveal a reverse proxy in the path. ### RFC 1918 private address (https://adminkit.net/glossary/rfc1918-private-address/) RFC 1918 reserves three IPv4 blocks -- 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16 -- for private networks, never routed on the public internet without NAT rewriting the source address at the boundary. AdminKit's subnet tooling helps confirm whether a given address actually falls inside one of these reserved ranges. ### RPKI ROA (Route Origin Authorization) (https://adminkit.net/glossary/rpki-route-origin-authorization/) An RPKI Route Origin Authorization (ROA), defined in RFC 6482, is a signed object stating which AS number may originate routing announcements for an IP prefix, letting routers validate BGP announcements cryptographically. AdminKit's WHOIS tool shows who holds a block -- the same registry data a ROA's issuer is authorized against. ### RRSIG record (https://adminkit.net/glossary/rrsig-record/) An RRSIG record, defined in RFC 4034, carries the DNSSEC signature over a specific set of DNS records, letting a validating resolver confirm nothing was altered since the zone owner signed it. AdminKit's DNSSEC guide explains how one expired RRSIG signature can take an otherwise-unchanged zone offline for validating resolvers. ### RTSP (https://adminkit.net/glossary/rtsp/) RTSP (Real-Time Streaming Protocol) is a control protocol IP cameras, NVRs and video doorbells use to negotiate a live video stream, typically on port 554, with no mandatory authentication or encryption of its own. AdminKit's guide explains how to check whether a camera's RTSP port is exposed to the internet. ### SASL authentication (https://adminkit.net/glossary/sasl-authentication/) SASL, defined in RFC 4422, is a pluggable authentication framework that protocols like SMTP, IMAP, and LDAP use instead of each defining their own login mechanism; SMTP AUTH (RFC 4954) is its mail-specific extension. AdminKit's STARTTLS checker confirms a mail server encrypts the connection SASL credentials are expected to travel over. ### Self-signed certificate (https://adminkit.net/glossary/self-signed-certificate/) A self-signed certificate is an X.509 certificate whose issuer and subject are the same entity, signed with its own key rather than a certificate authority, so no trust chain backs it. AdminKit's SSL checker tool reports whether a live certificate is self-signed or chains to a publicly trusted root. ### SMB (Server Message Block) (https://adminkit.net/glossary/smb/) SMB (Server Message Block) is Microsoft's protocol for sharing files, printers and some remote administration between machines on a local network, most commonly reached on TCP port 445. AdminKit's guide explains why CISA still tells every network to block SMB at the internet-facing perimeter entirely. ### Server-sent events (SSE) (https://adminkit.net/glossary/server-sent-events-sse/) Server-sent events (SSE) is a WHATWG web standard letting a server push a one-way stream of text events to a client over one long-lived HTTP connection. MCP's original transport paired SSE with HTTP; AdminKit's own MCP connector instead uses the Streamable HTTP transport that replaced it. ### SMTP HELO/EHLO (https://adminkit.net/glossary/smtp-helo-ehlo/) EHLO, the extended form of SMTP's opening HELO greeting introduced by RFC 1869 and carried in RFC 5321, asks a mail server which extensions -- STARTTLS, AUTH, SIZE and others -- it supports. AdminKit's MX lookup tool finds the mail servers a diagnostic EHLO command would actually be sent to. ### SMTP REQUIRETLS (https://adminkit.net/glossary/smtp-requiretls/) SMTP REQUIRETLS, defined in RFC 8689, lets a sender demand encrypted delivery for one message all the way to its destination, refusing to send rather than silently falling back to plaintext like ordinary STARTTLS. AdminKit's STARTTLS guide covers the related MTA-STS mechanism, which sets the same no-downgrade policy domain-wide instead. ### SMTP (Simple Mail Transfer Protocol) (https://adminkit.net/glossary/smtp/) SMTP (RFC 5321) is the store-and-forward protocol mail servers use to relay email from a sender's outgoing server to a recipient's incoming one, with no built-in encryption or sender authentication of its own. AdminKit's STARTTLS checker verifies whether a mail server enforces the encryption extension plain SMTP never included. ### SNMP (https://adminkit.net/glossary/snmp/) SNMP (Simple Network Management Protocol) monitors and configures routers, switches and other network equipment by reading and writing values from a device's management database, often using a plaintext community string left at its default. AdminKit's Port Check tool checks whether this kind of weakly authenticated management protocol is reachable from outside. ### SOA record (https://adminkit.net/glossary/soa-record/) An SOA record is the first record in every DNS zone, naming the zone's primary nameserver, administrator contact, and timing values that control how secondary nameservers replicate it. AdminKit's DNS Lookup tool shows a domain's SOA record alongside its other DNS records in one check. ### SPF void lookup (https://adminkit.net/glossary/spf-void-lookup/) A void lookup, defined in RFC 7208 section 4.6.4, is an SPF DNS query that returns an empty answer or NXDOMAIN; the RFC recommends capping these at two, separate from SPF's overall 10-lookup limit. AdminKit's SPF guide covers both limits, including the stale includes that typically trigger a void lookup. ### SPF (https://adminkit.net/glossary/spf/) SPF (Sender Policy Framework) is a DNS TXT record that lists which mail servers are authorized to send email claiming to be from a domain, checked against the IP that actually delivered a message. AdminKit's SPF Check tool checks a domain's SPF record and its DNS lookup count directly. ### SRS (Sender Rewriting Scheme) (https://adminkit.net/glossary/srs-sender-rewriting-scheme/) SRS (Sender Rewriting Scheme) fixes SPF failures caused by email forwarding by rewriting the envelope sender address at the forwarding server to one on the forwarder's own domain, so the forwarder's own SPF record is checked instead. AdminKit's guide explains how SRS keeps forwarded mail passing SPF. ### SRV record (https://adminkit.net/glossary/srv-record/) An SRV record publishes the hostname and port a specific service is reachable on for a domain, letting a client discover where to connect for something like SIP or XMPP without one fixed port. AdminKit's LAN discovery guide covers the related mDNS-based pattern that layers SRV-style records on top of multicast DNS. ### SSDP (https://adminkit.net/glossary/ssdp/) SSDP (Simple Service Discovery Protocol) is the UPnP discovery mechanism devices use to announce themselves over multicast UDP on port 1900 within a local network, which becomes a UDP amplification risk if a router answers SSDP from the public internet. AdminKit's Port Check tool checks whether port 1900 is reachable from outside. ### SSRF (https://adminkit.net/glossary/ssrf/) SSRF (Server-Side Request Forgery) is a vulnerability where an attacker tricks a server, or an AI agent calling tools on its behalf, into requesting a destination the attacker chooses rather than the one intended, often reaching internal or metadata addresses. AdminKit's MCP hardening guide covers where this risk enters an agent's tool calls. ### STARTTLS (https://adminkit.net/glossary/starttls/) STARTTLS is a command that upgrades an initially plain-text SMTP, IMAP or POP3 connection to an encrypted TLS connection, but only if both the sending and receiving server support and accept it. AdminKit's SSL Check tool checks a mail server's TLS and certificate configuration, including STARTTLS support. ### stdio transport (MCP) (https://adminkit.net/glossary/stdio-transport-mcp/) The stdio transport is one of MCP's two standard transports, letting a client spawn an MCP server as a local child process and exchange JSON-RPC messages over its standard input and output instead of a network socket. AdminKit's own adminkit-mcp connector defaults to stdio for local use. ### Streamable HTTP transport (MCP) (https://adminkit.net/glossary/streamable-http-transport-mcp/) Streamable HTTP is the MCP transport for a networked server, letting a client connect over ordinary HTTP request and response bodies instead of a locally spawned process; it replaced an earlier HTTP-plus-SSE transport. AdminKit's adminkit-mcp connector supports it via an --http flag for remote agents. ### Stub resolver (https://adminkit.net/glossary/stub-resolver/) A stub resolver is the lightweight DNS client built into an operating system that forwards every lookup to a recursive resolver rather than walking the DNS hierarchy itself, a pattern RFC 1123 explicitly describes. AdminKit's DNS resolver test tool checks which resolver a device's stub resolver is actually using. ### STUN/TURN (https://adminkit.net/glossary/stun-turn/) STUN (Session Traversal Utilities for NAT) and TURN (Traversal Using Relays around NAT) are protocols that help two devices behind NAT establish a working connection, as WebRTC does for video calls. AdminKit's My IP tool shows the public address and port a STUN server would discover for your own connection, including behind CGNAT. ### SAN (Subject Alternative Name) (https://adminkit.net/glossary/subject-alternative-name-san/) SAN (Subject Alternative Name), defined in RFC 5280, is the X.509 certificate extension listing every hostname a certificate actually covers -- the field browsers check for a match, not the legacy subject Common Name. AdminKit's SSL checker shows the exact SAN list a live certificate presents. ### Subnet (https://adminkit.net/glossary/subnet/) A subnet is a logical subdivision of an IP network, defined by a CIDR prefix length like /24 that marks how many address bits identify the network versus the host. AdminKit's subnet calculator works out the usable range, broadcast address and host count for any prefix, and checks whether a given address falls inside it. ### Subresource Integrity (SRI) (https://adminkit.net/glossary/subresource-integrity/) Subresource Integrity (SRI) lets a web page specify a cryptographic hash a fetched script or stylesheet must match before the browser executes it, blocking a tampered file from a CDN or third-party host. AdminKit's guide to judging header strength covers the related script-trust problem Content-Security-Policy addresses from the response side. ### Supernetting (route aggregation) (https://adminkit.net/glossary/supernetting/) Supernetting, also called route aggregation, combines several contiguous, equal-size IP blocks into one larger block advertised as a single route, using CIDR notation defined in RFC 4632. AdminKit's subnet calculator shows a block's boundaries, useful for checking whether adjacent blocks can be cleanly aggregated this way. ### SVCB/HTTPS record (https://adminkit.net/glossary/svcb-https-record/) SVCB and HTTPS, both defined in RFC 9460, are DNS record types that publish service-connection hints -- such as supported ALPN protocols or a non-default port -- in the same answer as a service's address. AdminKit's DNS lookup tool shows a domain's full record set, SVCB/HTTPS included. ### SYN Cookies (https://adminkit.net/glossary/syn-cookies/) SYN cookies are a server-side defense against SYN flooding, described in RFC 4987, letting a server answer a SYN without allocating per-connection state by encoding what it needs into the SYN-ACK's sequence number, creating real state only once a valid final ACK arrives. AdminKit's protective DNS product applies the same instinct: absorb abuse before it costs server resources. ### System prompt (https://adminkit.net/glossary/system-prompt/) A system prompt is the instruction set an application gives an AI model before a task starts, setting its role and behavior boundaries, separate from user input and content the model reads afterward. AdminKit's guide to securing an MCP server flags tool output that merely imitates a system prompt as a red flag. ### TCP Fast Open (TFO) (https://adminkit.net/glossary/tcp-fast-open/) TCP Fast Open (TFO), defined in RFC 7413, lets a client send data in the SYN packet of a repeat connection to a server it talked to before, using a server-issued cookie to prove the request isn't forged, saving up to one round trip. AdminKit's port check tests whether a TCP port is reachable before TFO's latency saving even matters. ### Telnet (https://adminkit.net/glossary/telnet/) Telnet (RFC 854) is a decades-old protocol for opening a remote terminal session, typically on port 23, that carries no encryption at all -- a username, password, and every keystroke travel in plain text. AdminKit's guide checks whether a device's Telnet port is actually reachable from the public internet. ### TLD (top-level domain) (https://adminkit.net/glossary/tld/) A top-level domain (TLD) is the last label in a domain name, such as .com or a country code like .uk, delegated under ICANN's registry system per RFC 1591 and published in IANA's root zone. AdminKit's WHOIS tool looks up registration data for a domain under any TLD. ### Teredo and 6to4 (https://adminkit.net/glossary/teredo-6to4-transition/) Teredo (RFC 4380) and 6to4 (RFC 3056) are legacy IPv6 transition mechanisms that tunnel IPv6 packets inside IPv4 traffic, which can reach a device despite a firewall written with only IPv4 rules in mind. AdminKit's IPv6 firewall guide explains why a device needs its own IPv6-aware rules regardless. ### TLS-RPT (https://adminkit.net/glossary/tls-rpt/) TLS-RPT, defined in RFC 8460, is a DNS TXT record telling other mail servers where to send reports summarizing TLS delivery failures, including ones tied to a domain's MTA-STS policy. AdminKit's email authentication guide covers how TLS-RPT pairs with MTA-STS and DMARC reporting. ### TLS handshake (https://adminkit.net/glossary/tls-handshake/) The TLS handshake is the message exchange, compressed to one round trip by TLS 1.3 (RFC 8446), in which a client and server agree a cipher suite, the server proves its identity with a certificate, and both derive session keys. AdminKit's SSL checker reports the negotiated version and cipher suite a live handshake completes with. ### TLS SNI (Server Name Indication) (https://adminkit.net/glossary/tls-sni/) Server Name Indication (SNI), defined in RFC 6066, is a TLS extension letting a client state the hostname it wants inside the cleartext ClientHello, so a server hosting multiple HTTPS sites on one IP can pick the right certificate. AdminKit's SSL checker shows which certificate a server actually presents for a hostname. ### Tool allowlist (https://adminkit.net/glossary/tool-allowlist/) A tool allowlist restricts an AI agent, or the gateway mediating its access, to a named, pre-approved set of tools it may call, rejecting any call outside that set even if the server exposes more. AdminKit's MCP/Agent Gateway enforces exactly this kind of allowlist, so a compromised or misconfigured server can't silently widen what an agent is allowed to do. ### TR-069 (https://adminkit.net/glossary/tr-069/) TR-069, also called CWMP (CPE WAN Management Protocol), is a standard ISPs use to remotely configure and update customer routers and modems, typically on port 7547. Reachable from the public internet instead of just the ISP's own network, a misconfigured TR-069 service has caused real router-compromise incidents, which is exactly what AdminKit's port check tool can help confirm. ### TSIG (Transaction Signature) (https://adminkit.net/glossary/tsig-transaction-signature/) TSIG, defined in RFC 8945, authenticates a DNS message using a secret key shared between two servers, rather than trusting the message based on where it came from, by attaching a keyed hash over its contents plus a timestamp. It's the cryptographic alternative to IP-based allow-listing for zone transfers, which AdminKit's AXFR guide covers from the other side. ### TXT record (https://adminkit.net/glossary/txt-record/) A TXT record is a DNS entry that holds arbitrary text, originally meant for human-readable notes but now used almost entirely to carry machine-readable policy strings other systems parse automatically, such as the SPF policy AdminKit's SPF check tool reads directly from a domain's TXT record. A domain can publish several unrelated TXT records at once. ### ULA (Unique Local Address) (https://adminkit.net/glossary/ula-unique-local-address/) A Unique Local Address (ULA, RFC 4193) is an IPv6 range reserved for private, local-network use, playing a role similar to RFC 1918 private IPv4 ranges. Each site generates its own /48 prefix pseudo-randomly, so independently configured networks rarely collide. AdminKit's subnet calculator computes a ULA block's network range and host count. ### UPnP (https://adminkit.net/glossary/upnp/) UPnP (Universal Plug and Play) lets devices on a local network discover each other and open port-forwarding rules on the router automatically, without the owner reviewing each request. AdminKit's port check tool shows which ports are open on your connection, including ones UPnP may have opened without your knowledge. ### User-Agent (https://adminkit.net/glossary/user-agent/) The User-Agent header is an HTTP request field, defined in RFC 9110, that lets a client identify its software -- conventionally a string naming the browser, its engine and the operating system. It's client-supplied and unverified, so AdminKit's User-Agent tool treats what it parses as a self-reported hint, not a verified fact. ### VERP (Variable Envelope Return Path) (https://adminkit.net/glossary/verp-variable-envelope-return-path/) VERP (Variable Envelope Return Path) encodes each mailing-list subscriber's own address into the envelope sender of the copy they're sent, so a later bounce is self-identifying instead of generic. AdminKit's guide to email bounces and backscatter explains how the envelope sender normally routes a failed delivery back to its source. ### VLAN (802.1Q) (https://adminkit.net/glossary/vlan/) A VLAN (Virtual LAN) is a logically separate broadcast domain on a shared physical network, created by tagging Ethernet frames with a VLAN ID per the IEEE 802.1Q standard rather than by physically separate cabling. AdminKit's guide to planning VLANs with a subnet calculator covers assigning each VLAN its own IP range once it is already segmented at this layer. ### VNC (Virtual Network Computing) (https://adminkit.net/glossary/vnc/) VNC is a cross-platform protocol for remotely viewing and controlling another computer's graphical desktop, built on the RFB protocol (RFC 6143) and typically reachable on port 5900. Its classic authentication truncates passwords to 8 characters, a legacy weakness the RFC itself documents -- AdminKit's port-exposure guide covers checking whether a device's VNC port is reachable at all. ### Well-known port (https://adminkit.net/glossary/well-known-port/) A well-known port -- a System Port in RFC 6335's terms -- is one of the 1,024 numbers from 0-1023 IANA reserves for an established service, like 22 for SSH or 443 for HTTPS. A port number is a strong hint about what's listening, not a guarantee, which is why AdminKit's port-check tool reports what actually answers. ### Well-known URI (https://adminkit.net/glossary/well-known-uri/) A well-known URI is a resource published at a path beginning /.well-known/ on a host, under the registry RFC 8615 establishes so a new protocol can define a discoverable location for site-wide metadata. AdminKit's MCP server hardening checklist requires publishing OAuth metadata at two separate well-known URIs. ### WHOIS (https://adminkit.net/glossary/whois/) WHOIS is a simple TCP query/response protocol, defined in RFC 3912, for looking up who registered a domain name or IP address block, with no authentication and an undefined response structure. AdminKit's Whois/RDAP tool looks up a domain or IP's registration details using RDAP, the newer, structured protocol gradually replacing it. ### Wildcard DNS record (https://adminkit.net/glossary/wildcard-dns-record/) A wildcard DNS record uses an asterisk label, such as *.example.com, to answer queries for any subdomain without its own explicit record, a mechanism described in RFC 1034 and clarified in RFC 4592. AdminKit's DNS lookup tool shows exactly which record answered a query, making wildcard coverage easy to confirm. ### X.509 certificate (https://adminkit.net/glossary/x509-certificate/) An X.509 certificate is the standardized data structure, defined in RFC 5280, that binds a public key to an identity and is signed by the certificate authority that issued it. Every TLS certificate AdminKit's SSL/TLS check tool inspects is an X.509 certificate, carrying a subject, issuer, validity period and Subject Alternative Name list. ### Zero trust (https://adminkit.net/glossary/zero-trust/) Zero trust is a security model built on the assumption that no device, user or network segment should be trusted by default, including ones already inside a traditional perimeter -- every request is authenticated and authorized on its own merits. AdminKit's planned OT remote access product is designed to replace an open inbound port with an outbound-only, zero-trust tunnel. ### Zone transfer (AXFR) (https://adminkit.net/glossary/zone-transfer-axfr/) A zone transfer (AXFR) is the DNS mechanism a secondary nameserver uses to copy an entire zone's records in one bulk request, meant only for legitimate replication between a domain's own servers. A server misconfigured to answer AXFR for anyone leaks every record at once. AdminKit's DNS lookup tool checks individual records the safe way. ### ZONEMD record (https://adminkit.net/glossary/zonemd-record/) ZONEMD, defined in RFC 8976, is a DNS record holding a cryptographic digest of an entire zone's contents, letting a receiver verify a copy matches what the primary server published. It fills a gap DNSSEC's per-record RRSIG signatures don't cover -- AdminKit's AXFR guide explains the zone transfer a ZONEMD digest checks. ## Contact - [General email](mailto:hello@adminkit.net): general questions and early access requests. - [Security disclosure](mailto:security@adminkit.net): vulnerability reports; see also https://adminkit.net/security/. - [Privacy](mailto:privacy@adminkit.net): data-protection and privacy requests. - [Abuse](mailto:abuse@adminkit.net): report abuse of AdminKit's own tools or infrastructure. - [WhatsApp](https://wa.me/84937869689): +84 937 869 689.